Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Elevate appliance pull 18 inch is a contemporary aluminum appliance pull designed for projects that call for an 18 inch center to center mounting, so it aligns with standard appliance and tall door drilling layouts. The Elevate collection and contemporary style give this pull a modern look that matches contemporary cabinet and appliance fronts, which helps keep a consistent design line across a kitchen run. The graphite finish provides a dark, muted tone, so the pull reads as a deliberate design element rather than a bright accent. The aluminum material keeps weight down compared to many steel pulls, which helps when mounting on wide or tall doors where multiple pulls are used. The appliance pull product class identifies this piece for use on appliance fronts or large doors, so it suits oversized applications where a longer grip is needed for daily operation.
The 18 inch center to center measurement is the key installation dimension on this Berenson Elevate appliance pull, because it dictates exact hole placement on appliance panels and tall cabinet doors. The 10-24 thread size noted for the screws matches a common machine screw specification, which ties this pull to typical appliance panel mounting patterns that rely on machine threads. The 1 inch screw length detail signals that the mounting is set up for door or panel thicknesses that work with that thread engagement, which matters when planning panel build-ups or decorative face materials. The 2 inch projection and 1-3/16 inch width dimensions define the pull footprint off the surface, so installers can plan clearances near adjacent cabinets and appliance trims.
This appliance pull sits in the Elevate collection, which positions it with other contemporary pieces for cohesive kitchen and bath layouts that share the same profile. The graphite finish works with darker cabinet finishes and stainless or graphite-toned appliances, which helps tie together mixed-material fronts. The 19-5/16 inch overall length pairs well with full-height appliance doors or tall pantry doors, because the longer bar gives more hand contact area when opening heavier fronts. The 18 inch center to center dimension matches a common specification for appliance pulls, which helps keep drilling patterns consistent when multiple tall fronts are laid out on a job. The aluminum material makes this pull suitable when weight is a factor on larger doors, because each piece adds less load than many comparable steel pulls. The 2 inch projection supports use on paneled appliances and thicker door constructions, because it provides space for fingers between the door face and the bar.
The manufacturer part number 2114-4GPH-P identifies this exact Berenson Elevate appliance pull configuration, which simplifies reordering the same size and finish across multiple openings on a project. The defined 13/16 inch base diameter brings a consistent pad size to each contact point, which creates a uniform look when several pulls line up along a bank of tall units. The 1-3/16 inch grip width helps create a balanced proportion relative to the 19-5/16 inch length, which matters when aligning this pull with other Elevate series pieces in shorter lengths on nearby doors or drawers. The graphite finish connects directly to the specified color tone, which allows designers to repeat the same finish throughout a space without variation between pulls. The contemporary style classification tells installers and specifiers that this pull is intended for clean-lined projects, which helps align it with flat-panel doors, slab drawer fronts, and integrated appliance panels.
The Berenson Elevate appliance pull 18 inch uses an 18 inch center to center dimension, which sets the hole spacing for drilling into appliance panels or tall cabinet doors.
The pull has an overall length of 19-5/16 inches, which provides an extended grip area suited to full-height appliance doors and tall cabinet fronts.
This appliance pull is made from aluminum with a graphite finish, which delivers a lighter-weight construction and a dark, contemporary appearance on doors and panels.
The pull has a 2 inch projection from the mounting surface, providing space for fingers between the bar and the door or appliance panel face.
The specified screw size is 10-24 x 1 inch, which matches a common machine thread used for mounting appliance pulls through door or panel faces.
Each base has a 13/16 inch diameter and the pull width is 1-3/16 inches, creating a defined footprint and substantial grip on tall doors.
The Berenson Elevate appliance pull 18 inch pairs an 18 inch center to center layout with a 19-5/16 inch overall length, which suits full-height appliance panels and tall cabinet fronts. The aluminum construction and graphite finish deliver a contemporary look that ties into modern kitchen and bath projects. With defined dimensions for projection, base diameter, and width, this pull offers predictable clearances and proportions across a run of doors. For projects calling for an appliance-class pull in the Elevate collection and graphite finish, this model 2114-4GPH-P provides a consistent, spec-driven choice for installers and designers.
Sold In: 1 Each
