Berenson Elevate Series 6-5/16" (160 mm) Center to Center Satin Gold Pull, - 2104-40SG-P

Elevate Pull 160mm Satin Gold For Cabinets

Elevate pull 160mm satin gold identifies this Berenson Elevate Series 6-5/16 inch center to center pull, so installers get a clearly defined size for cabinet layouts. The 6-5/16 inch center to center dimension sets consistent handle spacing, which supports precise drilling on doors and drawer fronts. The overall 6-13/16 inch length creates a substantial hand grip, which helps users open wider or heavier fronts with a steady pull. Its 1-1/8 inch projection sets the handle off the face enough for fingers to wrap behind comfortably, which supports everyday use without knuckle contact on the surface. The 3/4 inch width presents a slim contemporary profile, which suits modern cabinet lines while still offering enough surface to grab. A 9/16 inch base diameter defines the footprint at the contact points, which helps with layout around panel edges and moldings. The satin gold finish delivers a soft metallic tone, which adds a warm accent to contemporary cabinetry.

Key Elevate Pull Details That Help On The Job

• The 6-5/16 inch center to center dimension establishes hole spacing, which streamlines template setup and repeat drilling across multiple cabinet fronts.
• The 6-13/16 inch overall length defines the visible handle span, which helps balance pull size with door or drawer width for a consistent visual run.
• The 1-1/8 inch projection sets stand-off from the surface, which supports comfortable gripping clearance on doors and drawers.
• The 3/4 inch width provides a slim bar profile, which gives a contemporary look while maintaining a defined gripping edge for fingers.
• The aluminum material keeps the pull lightweight, which eases handling during installation and reduces load on the mounting points.
• The satin gold finish provides a muted sheen, which coordinates with warm-toned hardware schemes in contemporary kitchens and baths.

Mounting And Fit Details For This Cabinet Pull

This Berenson Elevate Series pull is specified at 6-5/16 inches center to center, which lets installers align it with standard drilling jigs for that hole spacing. The 8-32 thread callout defines the screw interface in the pull, which matches a common cabinet hardware thread size for attachment through door and drawer fronts. A 1-1/8 inch projection means the pull stands off the cabinet face enough to clear typical door thicknesses, which supports a comfortable grip without contacting the surface. The 9/16 inch base diameter gives a compact footprint at each contact point, which helps position the pull on narrower rails or stile sections. With its 6-13/16 inch length and 3/4 inch width, the pull fits well across medium to wider fronts, which supports consistent alignment along a run of cabinets.

Using This Berenson Elevate Pull In Cabinet Runs

Where This Satin Gold Elevate Pull Works Best

This Berenson Elevate Series pull falls under handles and pulls for decorative hardware, which positions it for cabinet doors and drawer fronts in woodworking projects. The contemporary style designation points it toward modern or transitional cabinet designs, which helps align it with flat-panel or clean-lined fronts. Its satin gold finish adds a warm accent, which works well where a softer metallic tone is preferred over brighter finishes. The 6-5/16 inch center to center size suits medium to larger fronts, which supports using the same pull across base cabinets and wider drawers for visual continuity. At 6-13/16 inches in overall length, the pull spans a good portion of the front, which gives users a broad grip area when opening wider drawers or doors. The aluminum construction keeps weight down on the front, which is useful on larger doors where multiple pulls may be installed.

Details That Support Consistent Layout And Results

The precise 6-5/16 inch center to center dimension allows installers to rely on fixed drilling patterns, which cuts layout time across multi-cabinet runs. Its 3/4 inch width provides a clear reference for aligning the pull to edge reveals, which aids in establishing consistent offsets along stiles or drawer rails. The 1-1/8 inch projection sets a predictable stand-off, which helps keep grip feel the same from cabinet to cabinet. A 9/16 inch base diameter creates a compact contact area, which is useful when positioning near panel detail or adjacent hardware. The satin gold finish delivers a repeatable color tone, which supports matching across multiple pulls in a room. With the Berenson brand and the specific 2104-40SG-P part number, installers can reorder the same pull, which maintains a consistent look and feel on future additions or replacements.

Common Questions About This Berenson Elevate Pull

Selecting This Elevate Pull For Your Next Project

The Berenson Elevate Series 2104-40SG-P pull pairs a 6-5/16 inch center to center dimension with a 6-13/16 inch overall length, which suits medium and larger cabinet fronts in woodworking projects. Its aluminum construction with satin gold finish offers a contemporary look that coordinates with warm-toned schemes. With defined sizing for center to center, projection, width, and base diameter, this satin gold pull fits well into planned layouts where consistent drilling and alignment matter. For cabinetry built around contemporary decorative hardware and moldings, this Elevate pull provides a clearly specified option ready for installation.