Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Elevate appliance pull gives you a contemporary aluminum handle in a matte black finish, so appliance and cabinet panels pick up a clean, modern line that matches other matte black decorative hardware in the project.
The 18 inch center to center dimension sets the mounting holes, which helps align this pull with appliance panel layouts that call for a long, substantial handle across wider doors or tall panels.
The overall 19-5/16 inch length extends the grip area beyond the mounting span, so hands land naturally between the posts while keeping fastener locations fixed to that 18 inch spread.
A 2 inch projection from the mounting surface stands the pull off the panel, which leaves space behind the handle for fingers and work gloves while operating heavier doors on panels or large cabinets.
The 1-3/16 inch width and 13/16 inch base diameter give the pull a solid face and footing on the door, which spreads contact and helps the handle feel consistent with other substantial appliance pulls in similar installations.
The 18 inch center to center dimension is the critical mounting reference, because that measurement determines where hole locations land on appliance or cabinet panels when laying out the pull.
The base diameter of 13/16 inch defines the footprint at each mounting point, which helps when marking hole locations on narrow rails, stiles, or appliance panel trim where edge distance matters.
With an overall length of 19-5/16 inch, the pull occupies a clear span on the face of the door, which allows installers to balance the handle visually on tall panels while keeping the end distances predictable.
The 2 inch projection and 1-3/16 inch width combine to form the working grip volume, so once holes are drilled to that 18 inch pattern the door will present a consistent handhold for repeated daily use.
This appliance pull is part of the Elevate collection, so its contemporary style and matte black finish match other Elevate decorative hardware on cabinets and drawers in the same space.
The 18 inch center to center span works well on wider appliance fronts or tall cabinet doors, because the mounting posts are spread far enough to look balanced on larger faces.
At 19-5/16 inches overall, the pull stretches across more of the door width than a standard cabinet pull, which helps visually anchor appliance panels and tall pantry fronts.
The 2 inch projection gives extra clearance between the aluminum pull and the door surface, so hands have space when operating doors that see frequent, heavier use.
The 1-3/16 inch width across the face makes the pull read as an appliance-scale handle, so it does not get visually lost against full-height panels or wide drawer faces.
The 13/16 inch base diameter at each end creates a defined bearing surface against the panel, which supports a clean transition from door face to handle on contemporary slab fronts.
The 18 inch center to center measurement lets installers set out drilling jigs or templates to that single span, which keeps multiple doors or panels aligned when repeating the same pull across a run.
The overall 19-5/16 inch length gives a known edge-to-hole relationship, so the handle can be positioned consistently from door edges while maintaining even reveals above and below the grip.
The 2 inch projection influences how far the aluminum pull stands off the face, providing predictable clearance behind the handle that suits a wide range of hand sizes.
The 1-3/16 inch width gives a broad front surface, which offers a stable gripping area when opening heavier appliance panels in both residential and shop-built installations.
The 13/16 inch base diameter consolidates the contact area at each mounting point, which helps installers read the footprint when aligning the pull parallel to door edges or rail lines.
The combination of aluminum construction and matte black finish means the handle presents a consistent color and texture across its length, which helps projects maintain a uniform look when multiple Elevate pulls are used together.
The Berenson Elevate appliance pull has an 18 inch center to center measurement, which sets the exact drilling span for mounting holes on doors or appliance panels.
The appliance pull measures 19-5/16 inches in overall length, giving a longer gripping area than the 18 inch mounting span for use on wider or taller fronts.
The Elevate appliance pull has a 2 inch projection from the mounting surface, providing finger clearance behind the handle on doors and panels.
The pull is made from aluminum with a matte black finish, giving a metal handle with a non-reflective black surface for contemporary projects.
The Elevate appliance pull is 1-3/16 inches wide with a 13/16 inch base diameter, setting the face size and footprint at each mounting point.
This handle is part of the Elevate collection in a contemporary style, aligning it with other Elevate decorative hardware pieces.
The Berenson Elevate appliance pull with 18 inch center to center drilling, 19-5/16 inch overall length, and 2 inch projection offers a defined layout for contemporary appliance and cabinet fronts where a matte black aluminum handle is specified.
The combination of 1-3/16 inch width and 13/16 inch base diameter presents an appliance-scale grip and footprint, so this pull serves projects that call for a coordinated Elevate collection look across doors and panels.
Sold In: 1 Each
