Berenson Elevate Series 3-3/4" (95 mm) Center to Center Graphite Pull, - 2109-4GPH-P

Berenson Elevate Graphite Pull For Cabinets

Berenson Elevate graphite pull is a contemporary cabinet handle from the Elevate collection that gives cabinetry a clean, modern look, which suits professional installs and serious shop projects. The pull is made from aluminum, so it keeps weight down on doors and drawers while providing a solid feel in the hand. Its graphite finish defines the visual style, helping hardware read as a dark, uniform detail across a run of fronts. The pull measures 4-5/16 inches in overall length, which keeps it proportional on many cabinet sizes. A 3-3/4 inch center to center dimension sets hole spacing, so layout can follow a common drilling pattern on jigs. Projection is 1-1/8 inches, giving finger clearance off the face without sticking out excessively into walkways or tight galley spaces.

Key Elevate Series Pull Details In Practice

• The 3-3/4 inch center to center dimension defines exact hole spacing, which simplifies drilling templates and speeds repeatable installation across multiple cabinet fronts.
• The 4-5/16 inch overall length keeps the pull compact, which helps it sit cleanly on narrower drawer fronts while still offering enough grip area for everyday use.
• The 1-1/8 inch projection sets the pull off the surface, which provides finger room behind the handle and helps protect finished door faces from direct hand contact.
• The 3/4 inch width and 9/16 inch base diameter describe the pull footprint, which helps with layout on rail and stile dimensions and checking visual balance on smaller panels.
• The graphite finish defines the color and surface appearance, which lets the pull tie into darker finishes or contrast against lighter cabinet materials in a planned way.
• The aluminum material keeps the pull lightweight, which can reduce strain on small hinges and drawer slides compared to heavier solid metal components.

Installation And Mounting Details For This Pull

This Elevate Series cabinet pull uses a 3-3/4 inch center to center layout, so hole drilling aligns to that fixed spacing when setting up doors and drawers. The manufacturer lists an 8-32 x 1 inch screw size for mounting, which sets thread type and length for fastening through typical cabinet fronts. With a projection of 1-1/8 inches, the handle stands off far enough to grab without knuckles rubbing the door face, yet it stays tight enough to the cabinet to avoid catching on clothing in narrower spaces. The 3/4 inch width gives a stable gripping surface, which helps on heavier drawers where a narrow edge could feel sharp under load.

Using The Berenson Elevate Pull On Projects

Where This Elevate Series Cabinet Pull Fits

This Berenson Elevate Series cabinet pull comes from a contemporary style collection, which aligns with flat-panel doors, slab drawer fronts, and other modern cabinet lines. The 4-5/16 inch overall length suits many standard base and wall cabinet doors, so runs of cabinetry can stay visually consistent. With a 3-3/4 inch center to center dimension, the handle matches a widely used drilling pattern, which helps when laying out banks of drawers using existing shop jigs or CNC programs. The graphite finish supports darker design schemes where hardware is meant to read as a subtle element, and it can also create contrast on lighter laminates or painted fronts where a dark linear pull is desired. Because the material is aluminum, the pull works well on doors and drawers where weight is a consideration, such as larger fronts or furniture-style pieces.

Why These Pull Details Support Repeatable Work

The defined 3-3/4 inch center to center spacing on this 2109-4GPH-P pull standardizes hole locations, which reduces layout time and lowers the chance of mis-drilled fronts across a full kitchen or bank of casework. The specified 8-32 x 1 inch screw size keeps threading consistent from one pull to the next, which is useful when hardware needs to be swapped or adjusted during installation. A projection of 1-1/8 inches balances ergonomics and space management, giving comfortable access for fingers while reducing how far hardware projects into traffic paths. The 3/4 inch width and 9/16 inch base diameter define a predictable bearing surface against the door or drawer, which helps the pull sit solidly without looking oversized on standard face widths. With its aluminum construction and graphite finish, the pull offers a consistent appearance across multiple units, supporting uniform lines and alignment on professional cabinet jobs.

Common Questions About This Elevate Cabinet Pull

Selecting This Pull For Cabinet Projects

The Berenson Elevate graphite pull from Wurth Baer Supply combines a 3-3/4 inch center to center layout, 4-5/16 inch length, and 1-1/8 inch projection to support straightforward cabinet hardware installation. With aluminum construction, graphite finish, and contemporary styling, it fits modern shop builds and upgrades that call for a consistent pull spec. When a project needs a 96mm center to center cabinet pull that aligns with common drilling patterns, this Elevate Series option offers defined dimensions for repeatable results across an entire run.