Hettich Quadro V6 5D 10-Pack 270 mm Soft-Close Full Extension 90 lb Undermount Drawer Slide, Right Hand, Zinc, 9332642

270mm Undermount Drawer Slide For Compact Frameless Drawers

This is the right-hand member of Hettich's Quadro V6 5D concealed undermount system in the 270mm length — a ball-bearing, full-extension, soft-close slide rated 90 lb per pair, built for frameless cabinets and drawer boxes with 1/2 to 5/8 inch sides.

Key Features

• Full extension brings the entire 270mm drawer box out to the cabinet face, giving complete access to the drawer interior.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently without slamming.
• Ball-bearing carriage delivers smooth, precise travel under load across the drawer's full range of motion.
• 90 lb per pair capacity handles the demands of loaded kitchen and bath drawers at this compact length.
• Right-hand orientation is clearly marked — pair it with the matching left-hand member to make one complete working set.
• Zinc finish on steel provides durable, corrosion-resistant service in indoor cabinetry.

Where the 270mm Length Fits

At 270mm, this slide suits short-depth drawers — spice pull-outs, bathroom vanity drawers, desk pedestals, and other applications where cabinet depth is limited and a standard longer slide would overshoot the available interior. The 270mm nominal length calls for a drawer box built to Hettich's published specification for the Quadro V6 series, including correct box width, bottom recess, rear notch, and drilling for the series' locking devices. This slide mounts directly in frameless cabinets, fastening to the flat interior side panel. It is the frameless version; if your project uses face-frame construction, verify that a face-frame configuration is available for this length before ordering.

Build and Finish

The Quadro V6 5D runs on a ball-bearing carriage, which gives it a smoother, more precise feel under load than a roller-based undermount. Steel members with a zinc finish hold up through years of daily cycling in an indoor environment. Because the slide mounts beneath the drawer box and stays concealed when the drawer is open, the zinc finish is functional rather than decorative — the hardware disappears and the wood front is all that shows.

Who This Slide Is For

Cabinet shops running compact frameless casework — bathroom vanities, office furniture, small kitchen base units — will find the 270mm Quadro V6 5D a reliable match. The 5D designation in the Quadro family indicates the adjustment tier available through the series' locking devices, giving installers the ability to fine-tune the drawer front after hanging. This slide is sold as the right-hand member only; production shops typically stock lefts and rights in equal quantities and pair them at the bench. One pair covers one drawer.

The Right Slide for the Compact Drawer

Match the 270mm right-hand slide with its left-hand mate, build the box to the Quadro V6 specification, add the series-compatible locking devices your front requires, and the drawer runs quietly on ball bearings every time it opens.