Hettich Quadro V6 5D 10-Pack 380 mm Soft-Close Full Extension 90 lb Undermount Drawer Slide, Right Hand, Zinc, 9332650

Hettich Quadro V6 5D Undermount Slide For Frameless Cabinet Builds

The Hettich Quadro V6 5D is the right-hand cabinet member of a concealed, full-extension undermount drawer slide in the 380mm nominal length — a ball-bearing runner with integrated soft-close, rated 90 lb per pair, engineered for frameless cabinets with 1/2 to 5/8 inch drawer sides.

Key Features

• Full extension brings the entire drawer out to the cabinet face, so the back of the box is reachable without reaching in.
• Integrated soft-close catches the drawer near the end of travel and settles it shut quietly every time.
• Ball-bearing carriage runs in formed steel raceways for a smooth, precise pull under load.
• 90 lb capacity per pair handles heavily loaded kitchen, bath, and utility drawers.
• Right-hand orientation — one dedicated member per side keeps the system properly handed and tracks true.
• Zinc-finished steel construction for durable, long-term indoor service beneath the drawer box.

Where This Slide Fits in a Frameless Install

The Quadro V6 5D is built around frameless cabinet construction, mounting directly to the flat interior panel rather than behind a face frame. In a production shop running European-style boxes, this slide drops into the workflow cleanly: no rear mounting brackets are needed, and the mounting holes are compatible with the 32mm system-hole grid. At 380mm nominal length, this runner suits drawer boxes built to that specification — measure the cabinet's interior depth and confirm there is clearance for the slide and any rear hardware before ordering. The slide carries drawer sides from 1/2 inch to 5/8 inch (12.7mm to 16mm); build the box to Hettich's published specification for the Quadro series, including the correct box width, bottom recess, rear notch, and drilling for the front locking devices.

Construction and Finish

Steel members with a zinc finish give this runner the corrosion resistance needed for years of indoor use in a kitchen or bath environment. Because the slide mounts beneath the drawer box and is concealed when the drawer is open, the zinc finish is functional: it protects the steel through daily cycles without being a visible design element. The ball-bearing carriage is the key mechanical difference between the Quadro V6 line and roller-based undermounts — the steel balls in their retainers roll evenly between the members, keeping travel smooth and consistent under the drawer's rated load.

Who Reaches for the Quadro V6 5D

Production cabinet shops building frameless European-style cases reach for this runner when they want ball-bearing precision and integrated soft-close in a concealed slide without stepping up to a synchronized premium line. The 380mm length suits standard base-cabinet drawer stacks — think utensil drawers, pot-and-pan drawers, and file pulls in office furniture — where full rear access and a quiet, controlled close matter. Designers specifying modern handle-less kitchens will also find this runner a practical match, since the soft-close pairs naturally with push-to-open accessories if the project calls for them.

The Right Member for Every Right-Hand Position

Stocking the Quadro V6 5D right-hand runner alongside its left-hand counterpart means every drawer position in a frameless cabinet run is covered with a properly handed, full-extension, soft-close concealed slide at a 90 lb capacity that handles real production loads.