Hettich Quadro V6 5D 10-Pack 550 mm Soft-Close Full Extension 90 lb Undermount Drawer Slide, Right Hand, Zinc, 9332664

5D Precision and Full Extension, Engineered for Frameless Cabinetry

This is the right-hand member of Hettich's Quadro V6 5D undermount system in the 550mm length — a concealed, full-extension runner with integrated soft-close and ball-bearing travel, built for frameless cabinets with 1/2 to 5/8 inch drawer sides. Order the matching left-hand member alongside this one to make a complete working pair per drawer.

Key Features

• Full extension brings the entire drawer box out to the cabinet face, so nothing stays buried at the back of the 550mm run.
• Integrated soft-close catches the drawer near the end of travel and settles it shut without noise or impact.
• Ball-bearing carriage runs on hardened steel bearings for a smooth, consistent pull under load throughout the slide's service life.
• 90 lb weight capacity per pair handles loaded kitchen, bath, and utility drawers with margin to spare.
• 2D front adjustment through the Quadro locking devices lets the installer dial in height and side position after the drawer is hung.
• Zinc-finished steel construction stands up to indoor service and stays out of sight beneath the drawer box.

Where This Slide Fits

The 550mm length targets drawers in the 20 to 22 inch depth range — the cabinet category that covers standard kitchen base drawers, deep utensil drawers, and bath vanity pull-outs where full rear access matters. Full extension means the back corner of a spice or utensil drawer comes all the way out to the face of the cabinet, not just most of the way. The frameless cabinet type means the slide body mounts directly to the flat interior side panel, on the 32mm system grid, without rear brackets. Face-frame cabinets are not the intended application for this SKU — use a face-frame-configured undermount if the cabinet has a solid wood front frame.

Construction and Finish

Steel members with a zinc finish protect the slide through years of daily cycling indoors. The ball-bearing carriage distinguishes the Quadro V6 from roller-based undermounts: hardened steel balls in formed raceways handle load more precisely and maintain smooth travel under heavier or sustained weight. Because the slide mounts concealed beneath the drawer box, the zinc finish is a functional protective coating rather than a visible design element. Build the drawer box to Hettich's published specification for the Quadro V6 series — 550mm nominal length, correct box width, bottom recess, rear notch, and drilling for the Quadro locking devices. A box that does not meet the spec will not seat correctly on the runners.

Who Orders This Slide

Production cabinet shops running frameless European-style casework reach for the Quadro V6 5D when they need a reliable, full-extension concealed runner with post-install adjustment headroom. The 2D adjustment in the locking devices speeds front alignment on large runs by letting the installer correct height and side position without pulling the drawer. Designers specifying handle-less fronts or premium interiors will find the concealed profile and soft-close closing behavior match the intent of the design. Custom builders and renovation contractors working on individual kitchen or bath projects get the same full-access, quiet-close performance in a single-drawer quantity.

Frequently Asked Questions

The Right Runner for the Job

When the spec calls for full-extension soft-close performance in a 550mm frameless drawer, the Quadro V6 5D right-hand slide delivers the ball-bearing precision and post-install adjustability that keeps production installs moving and finished drawers dialed in.