Hickory Hardware Skylight 3 inch pull is a cabinet handle from the Skylight collection that uses simple squares and 90 degree angles to create a clean, contemporary look, which helps match modern kitchen and bath layouts. The pull is made from zinc, giving a solid metal feel that supports everyday use on frequently opened cabinet doors and drawers. Its elusive golden nickel finish provides a warm metallic tone that coordinates with nickel-based fixtures, helping installers keep finishes consistent across a project. The pull has a 3 inch center to center dimension, so it fits layouts drilled for standard 3 inch pulls on face frames or frameless fronts. Overall length is 3-3/8 inches, which leaves a small margin beyond the mounting holes to visually frame the handle on the door or drawer front. A projection of 1-1/8 inches creates finger clearance from the cabinet face, which aids comfortable gripping.
This Skylight series pull has a center to center dimension of 3 inches, so it aligns with pre-drilled 3 inch mounting holes on cabinet doors and drawers, reducing layout time on retrofit work. The 3-3/8 inch overall length means the pull slightly overhangs the distance between the mounting points, giving a framed look that suits narrow drawer fronts or smaller doors. A projection of 1-1/8 inches moves the gripping surface out from the cabinet face, which helps hands clear door profiles and adjacent hardware during use. The 3/8 inch width keeps the bar portion of the pull slim, supporting tight spacing on drawer stacks where wider pulls might visually crowd the fronts. With zinc construction and elusive golden nickel finish, the pull presents a consistent appearance across multiple cabinets in the same run.
The Skylight collection draws on contemporary kitchen design, using square forms and 90 degree angles to support straight-line cabinet layouts in both residential and commercial spaces. With a 3 inch center to center dimension, this pull suits cabinet runs drilled on the common 3 inch standard, making it practical for kitchen, bath, and built-in storage projects that already follow that spacing. The 3-3/8 inch length pairs well with doors and drawers where a compact pull is preferred, such as upper wall cabinets or smaller vanity drawers. Its elusive golden nickel finish coordinates with nickel-toned fixtures, helping designers and installers keep a unified color story on hardware, faucets, and other metal elements. Zinc construction gives the handle a metal base that supports repeated opening and closing of active cabinet zones.
The 3 inch center to center measurement on the HH075326-EGN model gives installers a fixed drilling reference, which simplifies layout when repeating the pull across cabinet banks. Because the length is 3-3/8 inches, the ends of the pull extend just beyond the mounting points, which helps align the handle visually with door stiles and drawer edges. The 1-1/8 inch projection sets the gripping surface off the face, which can aid clearance when cabinets are adjacent to walls or neighboring doors. A slim 3/8 inch width means that when multiple pulls are installed in a vertical stack, the handles do not dominate the drawer fronts, supporting clean lines on tall banks of drawers. The elusive golden nickel finish applied over zinc provides a uniform surface appearance, which helps installed pulls match each other from cabinet to cabinet.
The HH075326-EGN pull has a 3 inch center to center measurement, a 3-3/8 inch overall length, a 1-1/8 inch projection, and a 3/8 inch width, which guides drilling and layout on cabinet fronts.
The 3 inch center to center spacing matches a common cabinet drilling pattern, allowing this pull to fit doors and drawers already bored for 3 inch hardware in many installations.
The HH075326-EGN pull is made from zinc, providing a metal base that supports daily opening and closing of cabinets in kitchens, baths, and storage areas.
The Belwith Keeler Skylight pull uses an elusive golden nickel finish, giving a nickel-based tone that coordinates with other nickel-colored fixtures on the project.
The 1-1/8 inch projection holds the pull away from the cabinet face, providing finger clearance that supports a comfortable grip when opening doors and drawers.
The Skylight collection is inspired by contemporary kitchen design, using squares and 90 degree angles that align with straight-line cabinet styles and modern interiors.
The Hickory Hardware Skylight 3 inch pull combines a 3 inch center to center layout with a 3-3/8 inch overall length, giving a compact footprint that fits many cabinet door and drawer fronts. Its zinc construction and elusive golden nickel finish align with contemporary cabinet projects where metal hardware needs to match nickel-toned fixtures. With defined dimensions for length, projection, and width, this pull provides clear sizing targets that support consistent drilling and layout across a full run of cabinets. For projects calling for a modern, square-edge handle in elusive golden nickel, this HH075326-EGN model offers a defined option for cabinets using 3 inch pull spacing.
Sold In: 1 Each
