Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Skylight pull is a zinc handle from the Skylight collection, designed around simple squares and 90 degree angles, so it brings straight, contemporary lines to cabinet and furniture fronts. The 5-1/16 inch (128 mm) center to center dimension sets consistent spacing between fasteners, which keeps layouts uniform across banks of doors and drawers. Its overall length of 5-7/16 inch gives enough grip area for confident hand placement when opening heavier cabinet fronts. The 1-1/4 inch projection stands the pull off the surface, so fingers clear the door or drawer face during use. A 3/8 inch width creates a slim bar profile, which reads visually light while still presenting a defined edge to grab. The Elusive Golden Nickel finish adds a warm metallic tone that ties in with other nickel-based decorative hardware.
The Skylight series 128mm pull uses a 5-1/16 inch (128 mm) center to center dimension, so hole locations follow a standard metric spacing many jigs and templates support. That spacing helps maintain consistent alignment across multiple fronts in a run. Its 5-7/16 inch overall length means the bar extends slightly beyond the mounting points, which visually centers the pull on typical cabinet rails and drawer faces. With a 1-1/4 inch projection, the handle clears most door styles while giving room for fingers behind the bar. The 3/8 inch width results in a slim rectangular cross-section, keeping the hardware visually restrained when viewed straight on.
The Belwith Keeler Hickory Hardware Skylight series 5-1/16 inch center to center elusive golden nickel pull is part of a decorative hardware and moldings handles and pulls offering, so it suits cabinet and furniture projects where visible hardware is part of the design. The collection was inspired by contemporary kitchen design and focuses on squares and 90 degree angles, which aligns with flat-panel doors, straight-edged drawer fronts, and other modern casework. Its zinc construction ties into projects that call for metal pulls rather than integrated wood or routed grips, giving a defined handhold on doors and drawers. The elusive golden nickel finish coordinates with other Elusive Golden Nickel decorative hardware, helping maintain finish continuity across a room or millwork package.
The 5-1/16 inch (128 mm) center to center size places this pull in a common drilling range for kitchen and bath cabinets, making it appropriate where multiple pulls need to line up in banks or stacked drawer layouts. At 5-7/16 inch overall length, it visually scales between shorter and longer fronts, so a run of doors and drawers can share the same handle without abrupt changes in proportion. The 1-1/4 inch projection and 3/8 inch width work together to present a narrow rectangular bar that still stands off the face, which can be helpful on doors near adjacent walls where a deeper pull might feel crowded.
The Skylight collection emphasis on squares and 90 degree angles means each pull presents straight, repeatable geometry, which supports tight visual alignment when multiple units are installed along a rail. The 5-1/16 inch (128 mm) center to center spacing gives installers a fixed dimension to repeat with drilling templates, helping reduce layout variation from cabinet to cabinet. With a 5-7/16 inch overall length, the bar extends modestly beyond the fastener line, which can visually center the pull across typical stile or rail widths without overpowering narrower frames. The 1-1/4 inch projection ensures the gripping surface sits forward of the door or drawer plane, so fingers can pull straight back rather than sliding along the face.
The 3/8 inch width keeps the handle slim from the front, which allows tight reveals and minimal visual interruption on flat or slab fronts while still giving a distinct edge for grasping from above or below. The zinc material provides a solid-feeling metal component, supporting repeated operation on high-use cabinets. The elusive golden nickel finish defines the surface color, helping designers and installers match this pull with other Elusive Golden Nickel handles and pulls specified for the same project.
The Hickory Hardware Skylight pull has 5-1/16 inch (128 mm) center to center spacing, an overall length of 5-7/16 inch, a 1-1/4 inch projection, and a 3/8 inch width, guiding drilling and layout.
The HH075328-EGN pull is made from zinc, giving the handle a metal body suited to regular cabinet opening and closing in residential or shop environments.
This Belwith Keeler pull uses an Elusive Golden Nickel finish, so its surface presents a golden-toned nickel color that coordinates with other Elusive Golden Nickel decorative hardware.
The 5-1/16 inch (128 mm) center to center measurement sets the distance between mounting holes, allowing consistent drilling and alignment across multiple doors and drawers.
The Skylight collection handle has a 1-1/4 inch projection, so the bar stands off the cabinet face, providing finger clearance behind the pull during use.
The HH075328-EGN pull belongs to the Skylight collection, which was inspired by contemporary kitchen design and focuses on squared, 90 degree architectural forms.
The Elusive Golden Nickel pull HH075328-EGN from the Hickory Hardware Skylight collection combines a 5-1/16 inch (128 mm) center to center layout, zinc construction, and squared geometry, giving installers a defined, repeatable handle choice for contemporary cabinets and furniture. Its 5-7/16 inch overall length, 1-1/4 inch projection, and 3/8 inch width provide a slim, functional grip profile that aligns with modern casework. For projects calling for Elusive Golden Nickel decorative hardware, this Belwith Keeler pull offers a coordinated finish option for doors and drawers.
Sold In: 1 Each
