Hickory Hardware Skylight pull defines a modern cabinet handle using simple squares and 90 degree angles, so it brings a contemporary architectural look to doors and drawers without visual clutter. The pull belongs to the Skylight collection, which was inspired by contemporary kitchen design, giving installers a consistent style language across a run of cabinets. Its Elusive Golden Nickel finish delivers a warm metallic tone, helping hardware stand out subtly against painted or stained fronts. The pull measures 8-13/16 inches (224 mm) center to center, so it spans wider drawer faces comfortably and creates a proportional look on tall doors. Overall length is 9-1/4 inches, which leaves visible grip on each side of the fastener points and supports repeatable alignment along rails.
The center to center dimension of 224 mm on the HH075422-EGN pull sets a precise drilling pattern for installers, simplifying jig setup or CNC programming for repeat work. Its 8-13/16 inch spacing matches the specified center to center in both imperial and metric, so it fits layouts laid out in either system. The pull's projection of 1-1/4 inches establishes how far it extends off the face, which matters when clearing adjacent doors or nearby obstacles. With a width of 7/16 inch, the pull uses a narrow footprint, leaving more flat surface visible on the cabinet face for a lighter visual effect while still marking a clear grip point.
The Skylight collection design, based on the square and the 90 degree angle, suits contemporary kitchen layouts that emphasize clean lines and right-angle geometry, helping hardware disappear into the overall cabinet grid. With its 8-13/16 inch center to center spread, this pull fits well on wider drawers where a longer handle balances the front and supports two-handed opening. The 9-1/4 inch length also works on tall pantry or closet doors, giving enough span to feel substantial against larger panels. Its Elusive Golden Nickel finish supports projects calling for a golden-toned nickel look, helping match faucets or lighting using similar metal tones. Because the pull falls within the Decorative Hardware & Moldings category for handles and pulls, it aligns naturally with cabinetry, furniture, and built-in casework in kitchens, baths, and other interior spaces.
The 224 mm center to center spacing gives professionals a clear dimension for boring or CNC drilling, which helps maintain consistent reveals across long cabinet runs. This fixed spacing allows reuse of jigs and templates from one job to the next when the same HH075422-EGN pull is specified, reducing setup time. The 1-1/4 inch projection defines the hand clearance from the face, giving a predictable feel when specifying this pull across different room types. At 7/16 inch width, the narrow bar allows more flexibility in positioning on slim rail sections without crowding edges, which can be important on smaller drawer fronts. The zinc material gives the handle a solid core, carrying the load of repeated openings on heavily used cabinets. Belwith Keeler branding on this Skylight series pull signals it lives within a coordinated family of hardware, which helps designers and installers keep a consistent visual theme from one cabinet zone to another.
The HH075422-EGN pull has an 8-13/16 inch (224 mm) center to center dimension, 9-1/4 inch overall length, 1-1/4 inch projection, and 7/16 inch width, guiding hole locations and visual balance.
The 224 mm center to center spacing sets a fixed drilling pattern, allowing consistent jig or CNC settings when repeating this pull across multiple cabinet fronts.
The Skylight collection, based on the square and 90 degree angle, supports contemporary kitchen design where straight lines and simple geometry drive the overall cabinet look.
The pull uses an Elusive Golden Nickel finish, providing a warm metallic tone that coordinates with projects calling for golden-toned nickel cabinet hardware.
The HH075422-EGN pull is made from zinc, giving the handle a solid-feeling body suitable for regular cabinet door and drawer use.
This cabinet pull is from Belwith Keeler under the Hickory Hardware Skylight collection, aligning it with related contemporary decorative hardware pieces.
The Skylight series 8-13/16 inch center to center Elusive Golden Nickel pull brings a defined contemporary profile and known drilling pattern to cabinet projects. With its 224 mm spacing, zinc construction, and 1-1/4 inch projection, it suits high-use doors and drawers needing a modern linear handle. Choosing the HH075422-EGN model lets designers and installers match hardware across a space using a single dimension set and finish, supporting efficient layout and a unified visual result on cabinetry, furniture, and built-ins.
Sold In: 1 Each
