Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Skylight pull is a zinc cabinet handle from the Skylight collection that uses simple square lines and 90 degree angles to echo contemporary kitchen architecture. The 6-5/16 inch (160 mm) center to center drilling sets precise spacing between mounting holes, which matters when matching existing bore patterns or laying out a long run of doors and drawers. The Elusive Golden Nickel finish gives the zinc pull a warm metallic tone, which helps it coordinate with other golden nickel decorative hardware in the space. The pull length of 6-3/4 inch provides a comfortable gripping span across wider fronts, which supports confident opening on heavier cabinet doors. A projection of 1 inch sets the handle off the face of the cabinet, creating finger clearance while keeping the profile tight to the front. A 3/8 inch width delivers a slim, architectural bar look that aligns with the Skylight design intent.
The 6-5/16 inch center to center drilling on this Hickory Hardware Skylight pull defines exactly where mounting holes are located, which simplifies layout when drilling new cabinet doors or aligning with existing holes on replacements. The 6-3/4 inch overall length means the pull extends slightly beyond the screw centers on each side, which affects how much of the handle overhangs stile edges or drawer fronts. A projection of 1 inch determines how far the gripping area stands off the surface, which influences comfort when pulling and how close fronts can sit near walls or appliances. With a 3/8 inch width, the pull keeps a lean contact line against the cabinet, which can be useful when working near tight reveals or narrow rail sections on modern cabinetry.
The Skylight collection was inspired by contemporary kitchen design, taking square forms and 90 degree angles as the core geometry, which suits flat-panel cabinet doors and straight-lined casework. The 6-5/16 inch (160 mm) center to center size positions this pull squarely in the range often used on standard kitchen drawers and taller doors, which helps maintain consistent hardware sizing across most base and wall cabinets. The 6-3/4 inch length spreads that geometry across more of the front, which can visually anchor wider drawer faces while keeping proportions in line with the rest of the run. The Elusive Golden Nickel finish brings a golden-toned nickel surface to the zinc body, which lets this handle align with other decorative hardware and moldings in similar finishes sold by Wurth Baer Supply. Because the pull belongs to the Skylight collection, its squared edges and straight run tie into other Skylight pieces, which matters when a project calls for a unified hardware story from one room to the next.
The defined 6-5/16 inch center to center dimension on the HH075329-EGN pull gives installers a fixed reference, which helps when using drilling jigs or CNC patterns for repeatable hardware placement across multiple fronts. The 1 inch projection provides a known stand-off distance from the door face, which can influence reveal planning when doors open near adjacent panels or appliances. A narrow 3/8 inch width keeps the pull footprint small on the face, which can leave more uninterrupted surface on narrow rails and stiles. The zinc construction creates a single solid piece under the Elusive Golden Nickel finish, which keeps the feel of the pull consistent from job to job when the same part number is used throughout a project. Because this is a Belwith Keeler Hickory Hardware part with manufacturer number HH075329-EGN, reordering the exact pull later stays straightforward, which supports ongoing work when adding cabinets or replacing damaged fronts in an existing installation.
The Hickory Hardware Skylight pull has a 6-5/16 inch (160 mm) center to center measurement, which sets the hole spacing for drilling or aligning with existing cabinet hardware bores.
The pull length or diameter is 6-3/4 inch, which means it extends slightly beyond the 6-5/16 inch screw centers on each side for added grip and visual balance on the front.
This Belwith Keeler Skylight handle has a 1 inch projection, which sets the distance from the cabinet face to the gripping surface for everyday opening and closing.
The HH075329-EGN pull has a width of 3/8 inch, which creates a slim bar profile that matches the squared, architectural style of the Skylight collection on modern cabinets.
The Skylight series HH075329-EGN pull is made from zinc, which forms the body under the Elusive Golden Nickel finish for a consistent feel across matching installations.
The Belwith Keeler HH075329-EGN pull uses an Elusive Golden Nickel finish, which defines the visible golden nickel tone and helps coordinate with related decorative hardware.
The Hickory Hardware Skylight pull in Elusive Golden Nickel combines a 6-5/16 inch (160 mm) center to center drilling, 6-3/4 inch overall length, 1 inch projection, and 3/8 inch width, which together support clean layouts on contemporary cabinets. The zinc construction with the specified finish and the HH075329-EGN part number make this Belwith Keeler handle a defined choice when a project calls for repeatable sizing, matching color, and consistent feel across multiple cabinet runs supplied through Wurth Baer Supply.
Sold In: 1 Each
