Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Skylight pull is a zinc cabinet pull from the Skylight collection with a polished nickel finish, so it brings a contemporary architectural look built around simple square lines and 90 degree angles. The 5-1/16 inch (128 mm) center to center dimension sets consistent handle spacing across doors and drawers, which keeps layouts aligned from cabinet to cabinet. Overall length of 5-7/16 inch gives enough grip area without overpowering standard fronts, useful on both wall and base units. A projection of 1-1/4 inch stands the pull off the face just enough for a solid handhold, helping fingers clear the surface during use. Width of 3/8 inch keeps the profile slim, supporting a clean, unobtrusive line across multiple fronts in a run.
The 128 mm (5-1/16 inch) center to center drilling on this Skylight polished nickel pull sets a fixed hole spread for cabinet and drawer fronts, which supports repeatable boring patterns across a kitchen or bank of casework. At 5-7/16 inch overall length, the pull leaves a small margin beyond the hole centers, which helps maintain a balanced reveal at both ends on typical door and drawer sizes. The 1-1/4 inch projection gives space behind the pull for fingers, which matters when fronts sit near adjacent walls or appliances. With a 3/8 inch width, the pull keeps contact narrow on the face, which helps maintain a clean line while still giving a defined edge to pull against.
The Skylight collection design takes contemporary kitchen styling as its starting point, using the square and the 90 degree angle to suit straight-edged cabinet doors and drawer fronts. On runs with repeated 128 mm boring, this 5-1/16 inch center to center pull keeps every handle location consistent, which is useful when aligning hardware along tall pantry units or wide drawer stacks. The 5-7/16 inch overall length fits comfortably across standard drawer widths, so the pull can be used from smaller top drawers through to broader base drawers while maintaining one visual size. Its polished nickel finish gives a bright, reflective look that coordinates with other polished nickel elements, supporting a unified appearance across hinges, appliances, or faucets that share this finish.
The combination of 128 mm center to center spacing and a 5-7/16 inch body lets this Belwith Keeler cabinet pull sit with even overhang beyond each mounting point, which helps installers keep lines straight when hardware is viewed in long rows. A 1-1/4 inch projection stands the zinc pull off the surface, creating clearance that helps fingers wrap behind the pull without rubbing the door or drawer face during operation. The 3/8 inch width keeps the pull slim, so when many pulls are installed side by side, they read as crisp linear elements rather than bulky hardware. Because the pull uses zinc construction with a polished nickel finish, the surface presents as smooth and reflective, supporting a finished look once cabinets, casework, or furniture pieces are put into service.
The Hickory Hardware Skylight pull has a 5-1/16 inch (128 mm) center to center dimension, which sets the drilling pattern for consistent handle placement across cabinets and drawers.
The Skylight polished nickel pull has an overall length of 5-7/16 inch, providing slightly more length than the hole spacing for balanced end reveals on doors and drawers.
This Belwith Keeler cabinet pull projects 1-1/4 inch from the surface, creating clearance so fingers can comfortably grip behind the pull during everyday use.
The Skylight collection pull is made from zinc, giving a solid metal body that supports a firm feel when operating cabinet doors and drawers.
The HH075328-14 Skylight pull uses a polished nickel finish, providing a bright, reflective surface that visually coordinates with other polished nickel hardware.
The polished nickel Skylight cabinet pull has a width of 3/8 inch, creating a slim profile that maintains a clean, linear look across multiple cabinet fronts.
This 128 mm center to center pull from the Skylight collection combines zinc construction, a polished nickel finish, and a 5-7/16 inch length, aligning with contemporary cabinet layouts that favor straight lines and consistent spacing. The 1-1/4 inch projection and 3/8 inch width give a practical, comfortable grip without adding bulk to the door or drawer face. For projects built around polished nickel hardware and 128 mm drilling, this Hickory Hardware Skylight pull offers a coordinated option ready to repeat across full cabinet or casework runs.
Sold In: 1 Each
