Hickory Hardware Skylight pull is a zinc cabinet handle from the Skylight collection with a stainless steel finish, so it delivers a contemporary look based on simple square lines and 90 degree angles for modern residential or commercial casework. The 8-13/16 inch center to center drilling lets this pull span wider drawer fronts or tall doors, helping align hardware across banks of cabinets for a consistent layout. Overall length of 9-1/4 inch leaves a small margin past the drilling points, which supports visual balance on doors with wider stiles. Projection of 1-1/4 inch creates usable finger clearance while keeping the pull close to the face, which helps reduce snag points on tight walkways or work areas. Width of 7/16 inch gives a slim edge that fits visually with contemporary slab or shaker fronts in kitchens, baths, or built-ins.
The 224 mm, 8-13/16 inch center to center drilling gives a clear mounting dimension, which supports predictable alignment when setting up boring patterns for cabinetry runs. Using this fixed span lets installers repeat the same measurement from edge or rail to rail, simplifying layout across doors of varying widths. With a 9-1/4 inch overall length tied to that drilling, the ends of the pull sit close to the screw positions, so the bar appears visually centered on the hardware footprint. The 1-1/4 inch projection off the face keeps the grip area in a consistent plane with neighboring pulls, which can be important when aligning multiple doors along a continuous countertop or wall unit.
This zinc Hickory Hardware Skylight pull with stainless steel finish suits cabinet and furniture projects that use contemporary kitchen-inspired styling, because its square profile and 90 degree angles match straight-edged doors and drawer fronts. The 8-13/16 inch center to center drilling works well on medium to wide drawers and taller cabinet doors, where a longer pull supports two-handed operation for heavier loads. Its 7/16 inch width and 9-1/4 inch total length create a lean bar handle that spans more of the front, which visually anchors larger faces in kitchens, baths, or storage units. Since it is part of the Decorative Hardware & Moldings, Handles and Pulls category, this pull serves as operational hardware for daily opening and closing rather than as a purely ornamental component.
The defined 224 mm center to center measurement gives fabricators and installers a precise drilling reference, which supports consistent results when boring doors on site or programming production equipment. Because the projection is limited to 1-1/4 inch, doors and drawers fitted with this Skylight pull maintain a shallow hardware profile, helping align clearances with adjacent appliances or cabinet runs. The slim 7/16 inch width and square form factor let multiple pulls line up cleanly along vertical and horizontal grid lines, which can simplify layout decisions on modular cabinetry systems. Using the stainless steel finish across several locations creates a unified hardware appearance, tying together panels, drawer stacks, and tall units within the same visual scheme. Together, these details let shops and installers repeat the same layout logic from cabinet to cabinet while maintaining a consistent modern look.
The Hickory Hardware Skylight pull has an 8-13/16 inch, 224 mm center to center dimension, which sets the exact hole spacing when drilling cabinet doors or drawers for consistent alignment.
The pull length is 9-1/4 inch with a 1-1/4 inch projection and 7/16 inch width, so it presents a slim bar that stands off enough for a comfortable grip on cabinet fronts.
This Skylight collection pull is made from zinc with a stainless steel finish, giving a metal feel and a stainless appearance that coordinates with many fixtures and appliances.
Part number HH075422-SS is a Belwith Keeler Hickory Hardware pull from the Skylight collection, so it follows a contemporary design based on squares and 90 degree angles.
The 1-1/4 inch projection sets the pull close to the door face, providing finger clearance for operation while limiting how far the hardware extends into walking or working space.
The 8-13/16 inch center to center pull fits medium to wide cabinet drawers and tall doors, giving a longer grip area that suits contemporary kitchens, baths, and storage cabinetry.
The Hickory Hardware Skylight pull HH075422-SS combines a stainless steel finish, zinc construction, and 8-13/16 inch center to center drilling, so it fits modern cabinet layouts needing longer bar handles. Belwith Keeler design based on square forms and 90 degree angles keeps hardware aligned with straight-edged fronts in kitchens, baths, and built-ins. Use the defined 224 mm drilling, 9-1/4 inch length, and 1-1/4 inch projection as fixed layout values when planning consistent hardware placement across your next cabinet, furniture, or storage project.
Sold In: 1 Each
