Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Skylight pull is a zinc cabinet handle from the Skylight collection, giving you a straight, squared profile that matches contemporary kitchen design where simple 90 degree angles tie panels, doors, and drawer fronts together visually. The 3-3/4 inch (96 mm) center to center dimension sets consistent spacing for drilling, which helps maintain alignment from one cabinet face to the next across a run. Its elusive golden nickel finish puts a warm metallic tone on the zinc base, so the pull reads modern while pairing with a range of nickel-toned hinges and decorative hardware. The overall length of 4-3/16 inches leaves a small margin past the mounting holes, which keeps the ends clear of the drilled areas when you line up on narrow stiles or rails.
The 96 mm center to center measurement defines the drill layout, so your two mounting holes land at a precise spacing suited to standard cabinet hardware jigs. With a 4-3/16 inch overall length, the pull extends slightly past those holes at each end, which gives a small visual overhang while keeping end clearances tight on narrower frames. The 1-1/8 inch projection establishes how far the handle stands off the face, so you know the pull will clear typical door profiles once mounted. A 3/8 inch width keeps the contact line between pull and door slim, which matters when you are aligning multiple pulls in a grid on slab-style drawer fronts.
This Skylight collection pull from Belwith Keeler fits decorative hardware and moldings projects where a straight, square-edged handle suits contemporary cabinetry. The 96 mm center to center layout aligns with common cabinet pull spacing, so it integrates into runs of doors and drawers that share a consistent drilling pattern. The elusive golden nickel finish lets this handle sit between traditional nickel tones and warmer metallics, which supports use across kitchen, bath, and built-in storage where you want a single finish family. Its compact 4-3/16 inch length suits mid-size doors and drawers, so it balances well on standard upper cabinets while still giving enough hand contact on base cabinet fronts.
The combination of 3-3/4 inch (96 mm) center to center spacing and 3/8 inch width makes this HH075327-EGN pull straightforward to align in a straight line along cabinet runs, which reduces visual drift between handles. The 1-1/8 inch projection pushes the gripping surface out to a practical distance from the door or drawer front, helping users grasp the handle from above or below without interference from decorative edge profiles. Because the Skylight collection design follows the square and 90 degree angle theme, each pull relates cleanly to modern cabinet door styles that use flat panels and straight rails, simplifying design decisions when repeating this hardware across a job. The zinc construction gives the body a stable feel in daily use, which supports frequent opening and closing on active kitchen zones and storage cabinets.
The Hickory Hardware Skylight pull has a 3-3/4 inch (96 mm) center to center, which sets the hole spacing for drilling cabinet doors and drawers.
The HH075327-EGN pull measures 4-3/16 inches in overall length, so it slightly overhangs the mounting holes for a compact look on standard cabinet fronts.
The Skylight collection pull is made from zinc, which provides a solid handle body for repeated daily cabinet opening and closing.
This Belwith Keeler cabinet pull has an elusive golden nickel finish, giving a warm metallic tone that coordinates with nickel-based decorative hardware.
The Skylight pull projects 1-1/8 inches from the cabinet face, allowing practical finger clearance when gripping doors and drawers.
The elusive golden nickel handle is 3/8 inch wide, keeping the profile slim so it lines up cleanly on modern flat-panel cabinet fronts.
The Hickory Hardware Skylight pull in elusive golden nickel pairs its 3-3/4 inch (96 mm) center to center layout with a square, zinc body that suits modern cabinetry. For projects ordered through Wurth Baer Supply, this HH075327-EGN pull ties doors and drawers into a consistent hardware line across kitchens, baths, and built-ins using a single dimensional standard and finish.
Sold In: 1 Each
