Hickory Hardware Skylight Series 3" (76 mm) Center to Center Polished Nickel Pull, - HH075326-14

Hickory Hardware Skylight 3 Inch Pull For Cabinets

Hickory Hardware Skylight 3 inch pull gives cabinet doors and drawers a straight-line look using simple squares and 90 degree angles, so it suits contemporary kitchen design where clean geometry keeps runs of fronts visually consistent. The pull is part of the Skylight collection, which follows a balanced proportion between its 3 inch center to center mounting and its 3-3/8 inch overall length, helping layouts stay even across multiple fronts. Its polished nickel finish reflects light with a bright surface, which helps faces stand out on darker cabinet finishes. The pull is made from zinc, so the body provides a solid metal feel in hand while remaining manageable in weight during installation. Brand affiliation with Belwith Keeler places it within a decorative hardware line aimed at cabinet work, giving installers a defined style family when planning projects.

Key Skylight Pull Details For Cabinet Projects

• The 3 inch center to center drilling sets a common spread for cabinet pulls, so existing 3 inch hole patterns on doors or drawers can be used without layout changes during replacement work.
• The 3-3/8 inch overall length leaves a small extension beyond the 3 inch mounting points, which frames the screw locations and helps runs of hardware appear visually aligned on cabinet faces.
• The 1-1/8 inch projection establishes how far the pull stands off the cabinet, creating hand clearance while keeping the grip close enough for tight galley or small-room installations.
• The 3/8 inch width defines a narrow bar profile, which creates a lean appearance on the face while still giving enough edge surface for fingertip or three-finger pulls.
• The polished nickel finish supplies a bright metallic surface, letting the pull tie into other polished nickel decorative hardware or fixtures in the same room.
• The zinc material provides a metal construction suited to decorative hardware, giving a consistent base for the plated polished nickel finish across all pieces on a project.

Cabinet Pull Fit, Mounting, And Layout Details

The 3 inch center to center measurement on this Skylight pull sets the distance between mounting holes, so drill points follow that spread when setting up new cabinet fronts. The 3-3/8 inch length establishes the bar span across the face, which matters when lining up multiple pulls along wide drawer banks or tall pantry doors. A 1-1/8 inch projection defines standoff from the surface, so drawers can be gripped without contacting the finish coat behind the pull. The narrow 3/8 inch width keeps the footprint small on rail and stile constructions, which helps when working with narrow drawer fronts or small doors where larger pulls could crowd panel details. The polished nickel finish allows the pull to visually coordinate anywhere polished nickel decorative hardware is used, helping maintain a unified look along entire cabinet runs.

Using The Skylight Pull In Cabinet Installations

Where The Skylight Collection Pull Works Best

The Skylight collection inspiration from contemporary kitchen design makes this pull suited to modern cabinet layouts where square edges and 90 degree angles repeat across doors and drawers. Its 3 inch center to center drilling aligns with a widely used cabinet hardware pattern, so it fits projects laid out around that common dimension in both kitchen and other built-in cabinetry. The 3-3/8 inch length scales well on standard cabinet doors and drawers, so it can be used across uppers, bases, and utility cabinets for a consistent look. With a 1-1/8 inch projection, the pull functions on face-frame or frameless cabinets because it creates hand clearance off the face while staying compact. The polished nickel finish allows it to sit comfortably in spaces that also use polished nickel decorative hardware and moldings.

Details That Support Repeatable Cabinet Results

The defined 3 inch center to center spread lets installers use a single drilling setup or jig across all fronts on a project, reducing layout variation from door to door. The narrow 3/8 inch width helps pulls land cleanly on rails or narrow drawer fronts, which keeps screw centers within solid material and supports repeatable mounting positions. The 3-3/8 inch length gives a predictable edge distance from each screw to the pull ends, aiding alignment checks along multiple units installed in a row. Zinc construction provides a stable base under the polished nickel finish, so each pull presents a uniform appearance when lined up across a bank of cabinets. Because this pull is part of the Skylight collection, it lets hardware on doors and drawers share the same design language, which simplifies selection for projects built around consistent decorative hardware themes.

Common Questions About This Skylight Cabinet Pull

Select This Skylight Pull For Consistent Cabinet Layouts

The Hickory Hardware Skylight 3 inch pull from Belwith Keeler combines a 3 inch center to center drilling, 3-3/8 inch length, and 1-1/8 inch projection, so cabinet runs can follow a repeatable pattern. Its zinc construction with polished nickel finish ties into polished nickel decorative hardware and moldings, supporting a coordinated look. For cabinet projects using square lines and contemporary styling, this Skylight collection pull gives installers a defined size and finish to build around when planning door and drawer hardware placement.