Hickory Hardware Skylight 18 inch pull is a zinc cabinet handle with an 18 inch center to center mounting span in a stainless steel finish, giving long drawer and door fronts a clean, contemporary line that matches modern kitchen styling. The Skylight collection design is based on the square and a 90 degree angle, so every edge reads straight and true when aligned across multiple fronts. The pull length of 18-1/2 inch extends slightly beyond the 18 inch mounting spread, providing a firm gripping area at both ends. A 1-1/4 inch projection stands the handle off the face just enough for a solid hand grip while keeping doors close to the cabinet frame. The 1/2 inch width keeps the profile visually light, which helps larger cabinet runs look balanced while still giving solid finger contact.
The 18 inch center to center measurement on the HH075337-SS sets exact drilling locations, which lets jigs and templates be set once and repeated across matching fronts. With an 18-1/2 inch overall length, the handle slightly overhangs the mounting points, which helps align it visually to panel edges and drawer widths during layout. The 1-1/4 inch projection controls how far the pull stands off the face, influencing clearance past neighboring doors and adjacent cabinets along a run. A 1/2 inch width defines how much flat bearing surface rests against the door or drawer, supporting a stable feel when fastened and keeping torque spread over more face area.
The HH075337-SS pull from the Skylight collection is suited to cabinet and drawer fronts that benefit from its 18 inch center to center span, such as wide base drawers or tall pantry doors. The square and 90 degree angle styling suits contemporary kitchen design, so it fits projects where straight lines and right angles carry through doors, drawer faces, and trim. Its stainless steel finish pairs with stainless fixtures, so hardware on cabinets can visually tie into sinks, appliances, and other stainless elements in the same space. The 18-1/2 inch overall length reads proportionally on larger fronts, helping the pull look intentional on oversize drawers rather than underscaled.
The zinc material of this Skylight pull gives a solid core for the stainless steel finish, so the handle feels substantial in hand while visually presenting as stainless to match project finishes. Because the center to center is a precise 18 inches, installers can standardize boring patterns across multiple fronts, cutting layout time when repeating the HH075337-SS throughout a kitchen or bank of cases. The 1-1/4 inch projection determines how easily fingers fit behind the bar; this distance aids grip on heavier loaded drawers by providing enough leverage away from the door face. The 1/2 inch width influences how the pull sits along narrow or wide rails, helping maintain a balanced look whether the handle is mounted horizontally on drawers or vertically on doors. The consistent Skylight geometry of squares and right angles also helps align the pulls parallel to door and drawer edges, supporting straight sightlines across long cabinet installations.
The HH075337-SS pull has an 18 inch center to center, 18-1/2 inch length, 1-1/4 inch projection, and 1/2 inch width, which together define drilling layout, clearance, and visual scale on cabinet fronts.
The 18 inch center to center spacing lets installers set drilling jigs to a fixed dimension, so wide drawers and doors can use the same pattern for consistent alignment along a run.
The Skylight collection design, based on the square and 90 degree angle, supports contemporary cabinet projects where straight lines and right angles are carried through the hardware.
The stainless steel finish on this zinc pull visually coordinates with stainless fixtures and appliances, helping cabinet hardware match nearby metal surfaces in the room.
The 1-1/4 inch projection sets usable finger clearance behind the pull, affecting how easily hands grip doors and drawers without interfering with adjacent cabinet faces.
The HH075337-SS part number identifies this specific Skylight collection pull from Belwith Keeler, with its 18 inch center to center size and stainless steel finish.
The Hickory Hardware Skylight 18 inch pull in stainless steel finish offers an 18 inch center to center span, 18-1/2 inch length, 1-1/4 inch projection, and 1/2 inch width, so dimensions are clear when planning boring patterns and visual spacing. Using the HH075337-SS part number ties every order to this exact Skylight collection size and finish, which supports consistent hardware selection across a full cabinet installation.
Sold In: 1 Each
