Hickory Hardware Skylight 224mm pull is a Belwith Keeler cabinet handle designed around simple square lines and 90 degree angles, so it works cleanly with contemporary kitchen layouts where straight runs and flat-panel fronts are common. The 8-13/16 inch center to center dimension creates a long grip span, giving ample hand clearance on wider cabinet doors and drawers that see frequent use. Its overall length of 9-1/4 inch covers more rail space, which helps visually anchor larger fronts in a run of cabinets. The 1-1/4 inch projection sets the handle off the face just far enough to grab comfortably while keeping the pull tight to the cabinet, which supports a streamlined look. A polished nickel finish reflects surrounding light and surfaces, tying into other bright metal fixtures across a kitchen or shop-built installation.
The 8-13/16 inch (224 mm) center to center measurement on this Belwith Keeler Skylight pull defines the exact distance between mounting holes, so drill patterns can be laid out consistently across doors and drawers on a job. With a 9-1/4 inch overall length, the handle extends slightly beyond the hole spread at each end, which helps cover minor variations in edge reveals from cabinet to cabinet. The 1-1/4 inch projection keeps the grip away from finished faces just enough to grasp comfortably without reaching far past door fronts. A 7/16 inch width maintains a narrow bar profile, allowing this pull to fit visually on both standard-height doors and slimmer drawer fronts within the same installation.
The Skylight collection was inspired by contemporary kitchen design using the square and the 90 degree angle, so this pull fits best on cabinets that echo those straight architectural lines. With an 8-13/16 inch (224 mm) center to center size, it suits wider drawers and tall pantry doors where a shorter pull might look undersized. The 9-1/4 inch overall length stretches across more of the face, which visually ties together banks of drawers in a base run. Its polished nickel finish works alongside other polished nickel or similar bright metal fixtures, helping maintain a consistent look between cabinet hardware, faucets, and lighting in the same space. Because the material is zinc, the handle provides a solid metallic grip feel that aligns with typical decorative hardware on shop-built or factory cabinets.
The precise 224 mm center to center dimension on this HH075422-14 pull allows installers to use a single drilling template for repeated cabinets, which supports straight, aligned hardware rows across a kitchen or bank of casework. The 1-1/4 inch projection keeps the grip comfortable without pushing hardware too far out, which can help avoid handles catching on clothing in narrow walkways. At 7/16 inch width, the pull stays visually light even at 9-1/4 inch overall length, so it can be used repeatedly on upper and lower cabinets without looking bulky. The polished nickel finish reflects light uniformly, which helps long runs of cabinets read as a single, coordinated installation under task or ambient lighting.
The Hickory Hardware Skylight 224mm pull has an 8-13/16 inch (224 mm) center to center dimension, which sets the hole spacing for cabinet or drawer front drilling.
The HH075422-14 Skylight cabinet handle has an overall length of 9-1/4 inch, giving extended coverage across the face of wider cabinet doors and drawers.
The Skylight series cabinet handle is made from zinc, providing a solid metal construction that matches other decorative hardware components in typical cabinet installations.
This Belwith Keeler decorative hardware pull has a polished nickel finish, so it coordinates with other polished nickel fixtures and bright metal details in a room.
The Skylight polished nickel cabinet pull has a 1-1/4 inch projection, giving finger clearance off the door or drawer face while keeping a compact profile.
This 224mm center to center drawer pull has a width of 7/16 inch, creating a slim bar appearance that suits both doors and drawers.
The Belwith Keeler Hickory Hardware Skylight 224mm pull offers an 8-13/16 inch center to center layout, 9-1/4 inch overall length, and 1-1/4 inch projection in polished nickel, giving cabinet projects a clean, contemporary handle that aligns dimensions and finish across multiple pieces.
Sold In: 1 Each
