Hickory Hardware Skylight pull is a zinc cabinet handle from the Skylight collection that uses simple squares and 90 degree angles to deliver a straight, contemporary look that aligns easily across cabinet doors and drawers in modern projects. The polished nickel finish reflects surrounding light, so the pull visually ties in with other bright metal hardware while keeping the linear geometry of the Skylight design. Its role as a decorative handle makes it suitable for cabinetry where a consistent visual rhythm across multiple fronts matters. As part of the Belwith Keeler decorative hardware family, this pull fits into coordinated layouts where matching style across various handle lengths helps keep design work predictable and repeatable.
The 160 mm center to center hole spacing defines the drilling pattern, so layout work can be based on this fixed distance when planning new fronts or aligning with pre-bored holes. With a 6-3/4 inch overall length, the handle sits slightly wider than the mounting span, leaving balanced overhangs past each mounting point on typical cabinet doors. Its 1 inch projection determines how far the pull stands off the front, which influences clearance on deep door profiles or adjacent fronts. The 3/8 inch width keeps the footprint narrow, which helps when fitting along slim rails or near panel edges where space is limited.
This 6-5/16 inch center to center pull suits cabinet and drawer fronts designed around longer handles, because the 160 mm mounting span stretches across wider fronts without looking undersized. The square and 90 degree angle form from the Skylight collection lends itself to contemporary kitchens, where straight lines and crisp corners echo surrounding cabinetry and appliances. Its 6-3/4 inch total length provides enough visual weight for tall doors, so runs of doors stay visually balanced when spaced evenly. The polished nickel finish helps the pull coordinate with bright metal elements in the space, tying together hinges, faucets, or other nickel-finished parts in the same project.
The defined 160 mm center to center spacing allows jigs and drilling templates to be set once and reused across multiple fronts, which reduces layout variation from door to door. With a 1 inch projection, the pull provides predictable clearance for fingers behind the handle, helping maintain similar hand feel across every cabinet using this model. The slim 3/8 inch width supports tight alignment on narrow rails, reducing conflicts with panel details or adjacent design elements on the door. As a zinc pull from the Skylight collection, it keeps weight manageable while still delivering the squared profile that designers expect from this series, so replacements or additions stay visually consistent with existing Skylight hardware.
The Hickory Hardware Skylight pull uses 6-5/16 inch, or 160 mm, center to center spacing, which sets the drilling layout for mounting on cabinet doors and drawers.
The pull has a 6-3/4 inch overall length, so it extends slightly beyond the 6-5/16 inch mounting span to give a longer gripping bar on the cabinet front.
The pull projects 1 inch from the cabinet surface, setting consistent hand clearance behind the bar on both doors and drawers during regular use.
The pull offers a 3/8 inch bar width, giving a slim, architectural profile that suits narrow rails while still providing a defined gripping edge.
The HH075329-14 pull is made of zinc, which keeps the hardware weight manageable while delivering the crisp, square form of the Skylight design.
The pull uses a polished nickel finish, providing a bright metal look that coordinates with other polished nickel decorative hardware in the same space.
The 6-5/16 inch center to center Hickory Hardware Skylight pull in polished nickel gives a defined 160 mm mounting span, a 6-3/4 inch overall length, and a 1 inch projection, so cabinet layouts stay uniform wherever this zinc Belwith Keeler handle is installed.
Sold In: 1 Each
