Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Skylight 12 inch pull is a zinc cabinet handle in the Skylight collection with a stainless steel finish and a 12 inch center to center drilling. This design takes contemporary kitchen elements down to simple squares and 90 degree angles, which creates a clean, architectural look on doors or drawers. The pull length of 12-7/16 inch gives extra hand space across wider faces, helping larger fronts read as one balanced line. The 7/16 inch width keeps the profile slim so fronts stay visually light, while still giving enough edge to grip confidently. A projection of 1-3/8 inch sets the pull far enough off the face for fingers to wrap easily, supporting comfortable opening on heavier fronts. Brand identification as Belwith Keeler places this pull within a coordinated decorative hardware family for consistent styling across a run of cabinets.
The 12 inch center to center dimension defines the drilling pattern, which lets installers lay out consistent holes across multiple doors or drawers using a single template or jig setting. The 12-7/16 inch overall length then indicates how close the pull ends will sit to panel edges, which helps during layout when balancing margins on wide or narrow faces. With a projection of 1-3/8 inch, the pull stands out far enough that fingers clear door and drawer edges, which can reduce knuckle contact during repeated opening. The 7/16 inch width keeps the pull rail relatively narrow, supporting tighter spacing when stacking multiple drawers while keeping fronts from feeling crowded.
The Skylight collection inspiration from contemporary kitchen design positions this 12 inch center to center pull for modern cabinet runs where straight lines are important. The square and 90 degree angle focus fits flat-panel doors or simple rail-and-stile fronts, helping the hardware read as part of the geometry rather than as ornament. A 12 inch drilling dimension suits wider base cabinet drawers or tall pantry doors, giving users a long grip area across the face. The 12-7/16 inch overall length lets the pull span a significant portion of large fronts, visually tying split drawer banks together. The stainless steel finish allows the zinc pull to sit near stainless appliances, hoods, or sinks without clashing, supporting a unified metal look across the room.
The defined 12 inch center to center measurement allows installers to standardize drilling across a whole project, which can speed layout when using story sticks or drilling jigs. Knowing the 12-7/16 inch length helps with planning consistent end clearances from door edges, especially when aligning multiple doors in a row. The 1-3/8 inch projection provides predictable finger room, which matters when doors open near walls or adjacent cabinets because users can grip without crowding their hands. The 7/16 inch width keeps the handle bar compact, which can help when fitting pulls on narrow rails without overhanging edges. The Belwith Keeler brand and Skylight naming help identify matching pieces within the same decorative hardware and moldings category, simplifying specification updates or future replacements.
The Hickory Hardware Skylight 12 inch pull has a 12 inch center to center dimension, which sets the hole spacing for drilling on cabinet doors and drawers.
The Skylight HH075336-SS pull has an overall length of 12-7/16 inch, which shows how much of the cabinet front the handle spans visually.
The pull is made from zinc with a stainless steel finish, giving a stainless appearance while using a zinc base for the handle body.
The HH075336-SS pull has a 1-3/8 inch projection, setting the handle off the cabinet face for finger clearance during opening.
The bar on this Skylight cabinet pull has a width of 7/16 inch, creating a slim profile while still providing a defined gripping edge.
This 12 inch pull is part of the Skylight collection from Belwith Keeler, placing it within a coordinated decorative hardware family.
The combination of a 12 inch center to center drilling, 12-7/16 inch overall length, and 1-3/8 inch projection defines this Skylight HH075336-SS pull as a fit for wider cabinet fronts that need a long, straight-line grip. The zinc construction with a stainless steel finish supports projects where the visual goal is stainless hardware across decorative hardware and moldings. The 7/16 inch width keeps the profile lean, supporting both base and wall cabinet layouts. When a run calls for a consistent, square-shouldered handle from the Skylight collection, this Belwith Keeler pull offers known dimensions that translate directly into layout and drilling steps.
Sold In: 1 Each
