Hickory Hardware Skylight Series 3-3/4" (96 mm) Center to Center Polished Nickel Pull, - HH075327-14

Hickory Hardware Skylight Pull For Modern Cabinets

Hickory Hardware Skylight pull uses a 3-3/4 inch (96 mm) center to center layout, which spaces the mounting holes for a consistent handle spread, important when drilling multiple cabinet doors or drawer fronts in a kitchen run. The Skylight collection design is based on simple squares and 90 degree angles, which creates a clean, contemporary look that aligns with modern cabinet lines and flat-panel fronts. The pull is made from zinc, which provides a solid metal body that supports daily opening and closing forces on doors and drawers. Its polished nickel finish gives a bright, reflective surface that coordinates with other polished nickel decorative hardware, helping create a unified appearance across a project. Overall length of 4-3/16 inches defines the visual footprint on the face of the cabinet, so layouts can be planned to balance handle size with door and drawer proportions.

Key Skylight Pull Details For Cabinet Projects

• The 3-3/4 inch (96 mm) center to center dimension sets precise mounting hole spacing, which streamlines jig setup and lets multiple pulls align accurately along cabinet runs.
• The 4-3/16 inch overall length defines how much of the cabinet face the pull covers, which helps with door and drawer proportioning when laying out multiple fronts in a bank.
• The 1-1/8 inch projection sets how far the pull stands off the door, leaving finger clearance for a comfortable grip while keeping the handle close enough to reduce snagging.
• The 3/8 inch width creates a slim bar profile, which delivers a narrow visual line on the cabinet face for a contemporary look that pairs with straight-edged door styles.
• The polished nickel finish provides a bright metallic surface, which visually ties in with other polished nickel decorative hardware elements on the same job.
• The zinc material gives the pull a metal construction, which withstands repeated door and drawer use in everyday cabinet applications.

Mounting Dimensions And Pull Alignment Details

The 96 mm center to center measurement defines the exact hole spacing needed, so drilling patterns can be set once and repeated across all cabinet doors and drawers. With a 4-3/16 inch overall length, the handle overhangs each hole center by a small amount, which helps position the pull visually in relation to door edges and panel frames. A 1-1/8 inch projection controls how far the hand sits away from the cabinet face, which affects both comfort when gripping and clearance around adjacent doors or walls. The 3/8 inch width keeps the handle profile narrow, which matters when aligning multiple pulls close together on smaller drawer fronts.

Why This 96 Mm Pull Fits Contemporary Cabinet Work

Skylight Collection Style For Straight-Lined Cabinets

The Skylight collection was inspired by contemporary kitchen design, using the square and the 90 degree angle as its base forms, which suits frameless and flat-panel cabinet styles common in modern layouts. This group is described as embodying the balance of proportion, so the relationship between the bar width, projection, and length is tuned for visual evenness on doors and drawers. The polished nickel finish adds a reflective metallic tone, which coordinates with polished nickel hinges and other decorative hardware, creating a continuous finish theme. As a decorative hardware piece in the handles and pulls category, it serves as the primary touch point on cabinet fronts, so its straight lines reinforce the overall design direction of the project.

Practical Sizing For Repeatable Cabinet Installations

The 3-3/4 inch (96 mm) center to center layout is a common cabinet drilling pattern, which simplifies setting up drilling jigs when installing multiple pulls on large jobs. With a 4-3/16 inch overall length, the pull leaves predictable edge distances from the mounting holes, which helps keep handles centered or aligned at consistent offsets across a run of doors or drawers. The 1-1/8 inch projection and 3/8 inch width combine to form a compact bar that still provides finger purchase, which matters when installing on narrower drawer fronts or near vertical face frame members. As a Belwith Keeler product with manufacturer part HH075327-14, it can be matched by part number when adding new cabinets to an existing Skylight collection installation. The zinc construction and polished nickel finish come together as a metal handle that supports regular operation in kitchen and other cabinet environments.

Common Questions About This Skylight Cabinet Pull

Select This 96 Mm Skylight Pull For Coordinated Jobs

This Hickory Hardware Skylight series 3-3/4 inch (96 mm) center to center polished nickel pull combines zinc construction, a 4-3/16 inch overall length, and a 1-1/8 inch projection, giving cabinet projects a contemporary, square-edged handle that aligns visually and dimensionally across doors and drawers.