
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock London cabinet pull 96mm is a zinc handle from the Amerock London collection designed for cabinet and furniture doors or drawers, giving projects a consistent modern look wherever the pull repeats across a run. The London collection uses faceted forms and clean geometric patterns, so the pull delivers a sharp, structured appearance that aligns well with straight-edged door styles and slab fronts. A polished nickel and black bronze split finish creates a dramatic contrast, helping the pull read clearly against both light and dark surfaces on the same project line. The pull length of 6-5/16 inches spans more of the rail, which visually balances mid-size cabinet doors. A 3-3/4 inch (96 mm) center-to-center dimension matches a common drilling pattern, supporting straightforward layout when working from standard boring jigs and cabinet plans.
The London pull uses a 3-3/4 inch (96 mm) center-to-center mounting layout, so each handle aligns to a fixed drilling pattern that works smoothly with standard cabinet boring setups. The pull is designed for use with #8-32 x 1 inch screw threads, which match a common machine screw spec for cabinet hardware and provide straightforward engagement into typical drawer fronts and doors. A projection of 1-9/16 inches sets the working stand-off, giving enough space for fingers while helping framed and frameless doors open without interference from adjacent fronts. The zinc material keeps the pull weight manageable during installation, which supports accurate alignment while fastening multiple units across a project.
The Amerock London cabinet pull 96mm fits decorative cabinet and furniture applications where a modern, geometric profile is needed across repeated fronts. Its 3-3/4 inch center-to-center dimension works well on standard kitchen and bath cabinet doors, letting installers use existing drilling jigs and templates for efficient production. On drawer banks, the 6-5/16 inch overall length stretches the handle closer to the drawer edges, which helps users find the pull quickly while keeping the hardware in scale with wider fronts. The 13/16 inch width creates a distinct line on the face without overwhelming narrow rails, so the same pull can run consistently from base cabinets up through wall units. With a polished nickel and black bronze finish combination, this London collection pull suits layouts that coordinate with both lighter hardware and darker fixtures in the same room, keeping a unified look from one cabinet zone to the next.
The 3-3/4 inch (96 mm) center-to-center spacing provides a fixed measurement that helps keep hardware lines straight on long cabinet runs, reducing layout variation between doors and drawers. A projection of 1-9/16 inches defines how far the pull stands off the surface, so installers can anticipate clearance around adjacent doors, trim, and appliance panels. Base dimensions of 9/16 inch by 3/8 inch concentrate the load at a compact footprint, allowing the pull to sit cleanly on narrow framing members while maintaining support at the fastener points. The polished nickel and black bronze split finish is built into a single handle, which removes the need to mix separate components to achieve a two-tone look and keeps finish alignment consistent from piece to piece. Because the pull body is zinc, it offers a stable, machined form that pairs well with precise boring, helping each handle sit square and level in relation to the cabinet edges.
The Amerock London Series pull has a 3-3/4 inch (96 mm) center-to-center size, which matches a common drilling pattern for cabinet hardware layouts.
The Amerock BP36648PNBBR pull measures 6-5/16 inches in overall length, giving a wider grip span suitable for standard cabinet doors and drawers.
The pull has a 1-9/16 inch projection, creating finger clearance from the door or drawer face for comfortable everyday use.
The London collection pull is made from zinc, giving a solid, stable body that works well with precise cabinet drilling and mounting.
The pull uses a polished nickel and black bronze finish, creating a split, two-tone look that coordinates with mixed-metal cabinet designs.
Each base on the Amerock London handle measures 9/16 inch by 3/8 inch, letting it sit neatly on narrow cabinet rails and stiles.
The Amerock London cabinet pull 96mm pairs a 3-3/4 inch center-to-center layout with a 6-5/16 inch overall length, giving both installers and fabricators a dependable pattern across multiple cabinets. With a polished nickel and black bronze finish on a zinc body, the pull brings a modern, geometric look that repeats cleanly from door to drawer. For projects that call for a unified London collection style and straightforward 96 mm drilling, this Amerock BP36648PNBBR handle delivers the dimensions and finish combination needed for consistent cabinet runs.
Sold In: 1 Each