Name: Hettich Quadro V6 380 mm Soft-Close Full Extension 90 lb Undermount Drawer Slide, Right Hand, Zinc, 9047683
Brand: Hettich America Corporation
Availability: InStock

Zinc Ball-Bearing Undermount Slide For Frameless Cabinet Builds

The Hettich Quadro V6 380mm right-hand undermount slide is a full-extension, soft-close concealed runner built for frameless cabinetry. It pairs with the matching left-hand member to carry a drawer box on ball bearings, rated 90 lb per pair, and closes silently on its integrated soft-close mechanism.

Key Features

Full extension brings the entire drawer box out to the cabinet face, putting rear contents within easy reach.
Integrated soft-close catches the drawer near the end of travel and settles it shut without slamming.
Ball-bearing carriage delivers smooth, precise travel under load across the full 380mm (14-15/16 in) slide length.
90 lb weight capacity per pair handles loaded kitchen, bath, and utility drawers with room to spare.
Right-hand orientation — order one left-hand and one right-hand member to build a complete working pair.
Steel construction with zinc finish stands up to years of indoor service, fully concealed beneath the drawer box.

Where This Slide Belongs in the Job

At 380mm nominal length, this slide suits drawers in the 15-inch depth class — a common size for base cabinet drawers in kitchens, bath vanities, and media consoles. The minimum installation depth is 15-15/16 inches, so check that the cabinet's interior depth clears that figure before ordering. Because this is a frameless version, it mounts directly to the flat interior side panels of a European-style cabinet box without needing rear mounting brackets. Production shops running frameless casework will find the Quadro V6 drops straight onto line-bored panels and handles the range of drawer applications in that depth class.

Build and Finish Details

Steel members with a zinc finish give the Quadro V6 the corrosion resistance it needs for years of indoor cabinet service. Ball bearings running in formed steel raceways deliver the kind of smooth, consistent pull that distinguishes a quality slide from an economy roller — load the drawer and the travel stays even. The concealed undermount position keeps the hardware invisible when the drawer is open, so the finish is functional rather than decorative. The 380mm (14-15/16 in) slide accommodates drawer boxes built for 1/2 to 5/8 inch (12.7 to 16mm) sides; the 5/8 inch maximum side thickness is the hard limit for this version.

Who Reaches for the Quadro V6

Cabinet shops building frameless European-style cases represent the natural home for this slide — the direct side-panel mount, metric length, and ball-bearing precision suit a production process that values consistent results drawer after drawer. Designers specifying a concealed look with a reliable soft-close will find the Quadro V6 covers the standard residential duty class at 90 lb per pair. For shops that stock by handedness, this right-hand single pairs with the left-hand counterpart and nothing else — one of each builds one drawer. Buyers stepping up from a roller-style euro slide will notice the difference in travel quality immediately.

This is listed as right hand — what does that mean, and do I need to order something else?

Yes. The Quadro V6 is a handed slide, meaning the left-side and right-side members are separate parts. This SKU is the right-hand member only. You need one right-hand and one left-hand slide to make a complete, working pair for a single drawer. Order both orientations in equal quantities.

Does this slide work in face-frame cabinets?

This version is rated for frameless cabinets, where it mounts directly to the flat interior side panel. For face-frame construction, the rear of the slide needs support from rear mounting brackets. Check for the face-frame version of the Quadro V6, which is configured for that application.

What drawer box spec do I need to match this slide?

The drawer box must be built to Hettich's published specification for the Quadro V6 380mm length — including the correct box width for the side clearance, drawer side thickness between 1/2 and 5/8 inch, bottom recess, and rear notch or drilling for the series' locking devices. An off-spec box will not seat correctly on the slide.

Are front locking devices included with this slide?

Quadro V6 front locking devices are series-specific accessories. Confirm whether locking devices ship with this SKU or are sold separately before placing your order, and note that locking devices from other brands or Hettich series will not interchange with the Quadro V6.

What is the difference between the 380mm nominal length and the 15-15/16 inch minimum installation depth?

The nominal length (380mm / 14-15/16 in) is the closed length of the slide itself. The minimum installation depth (15-15/16 in) is how deep the cabinet interior must be to accommodate the slide with proper clearance behind it. Measure your cabinet's interior depth and confirm it meets or exceeds 15-15/16 inches before ordering this length.

Precision Where It Counts

The Quadro V6 right-hand slide delivers ball-bearing accuracy, full extension, and integrated soft-close in a concealed package built for the demands of frameless production cabinetry — match the length to your drawer depth, pair it with the left-hand member, and the drawer runs right the first time.

Why Shop With Us?

BUY "YOUR WAY"

One Stop Shop

Next Day Delivery

Expert Support Team

Hettich Quadro V6 380 mm Soft-Close Full Extension 90 lb Undermount Drawer Slide, Right Hand, Zinc, 9047683

Description