Right-Hand Concealed Runner Built for Deep Frameless Drawers

This is the right-hand member of the Hettich Quadro V6 undermount drawer slide in the 600mm nominal length — a ball-bearing, full-extension concealed runner with integrated soft-close, rated 90 lb per pair, made for frameless cabinets and drawer boxes with 1/2 to 5/8 inch sides.

Key Features

• Right-hand orientation: This is a single right-hand slide; pair it with the matching left-hand Quadro V6 in the same length to complete a working set.
• Full extension: The drawer member travels the full nominal length, bringing the entire drawer box out to the cabinet face so everything at the back is within reach.
• Integrated soft-close: A built-in damper catches the drawer near the end of travel and settles it shut silently — no add-on hardware required.
• Ball-bearing carriage: Steel ball bearings run in formed raceways for a smooth, precise pull even when the drawer is loaded to capacity.
• 90 lb capacity per pair: Handles heavily loaded kitchen, pantry, and utility drawers with confidence.

Where the 600mm Length Earns Its Place

At 600mm nominal length (23-5/8 inches closed, requiring a minimum installation depth of 24-5/8 inches), this is a deep-drawer slide intended for full-depth base cabinet drawers — think a 24-inch kitchen base, a deep pantry pull-out, or a substantial utility drawer where a shorter slide would leave the box undersupported. The full-extension travel means no more reaching into the back of a deep drawer; the entire box rolls out to the cabinet face. For file pull-outs, pots-and-pans drawers, or deep tool-cabinet inserts in a frameless case, the 600mm Quadro V6 covers the application that shorter undermounts can't.

Construction and Finish

Steel members with a zinc finish give the Quadro V6 the durability to handle years of daily cycling indoors. Ball bearings in a formed steel raceway keep travel smooth and quiet under load — noticeably more precise than nylon-roller undermounts at this drawer depth and weight. Because the slide mounts beneath the drawer box, the zinc finish stays hidden in service; the hardware that matters is what the buyer sees and feels in the drawer's movement, not the finish on the slide body itself.

The Right Fit: Frameless Cabinets with 5/8 Inch Drawer Boxes

The Quadro V6 mounts directly to the cabinet side panel in frameless construction — no face-frame bracket required for this version. Build the drawer box for 1/2 to 5/8 inch drawer sides per Hettich's published specification for the Quadro V6 series, including the correct box width formula, bottom recess, and the rear notch and locking-device drilling the series calls for. Front locking devices and rear mounting hardware are Quadro V6-specific accessories; confirm the correct parts for your install before ordering. Production shops running deep frameless bases on a 32mm line-bore system will find this slide drops onto the panel with minimal layout work.

Deep Drawers, Done Quietly

Match the right-hand slide with its left-hand counterpart, build the box to Hettich's Quadro V6 spec, and the 600mm runner delivers full access and a soft, silent close on every deep drawer in the run.