Hettich Quadro V6 15" Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Right hand Zinc - 9304262

Right-Hand Ball-Bearing Undermount Slide For Compact and Mid-Size Drawers

The Hettich Quadro V6 15 inch undermount drawer slide is the right-hand member of a concealed, full-extension pair — a ball-bearing runner with integrated soft-close, rated 90 lb per pair, built for drawer boxes with 1/2 to 5/8 inch sides. At 15 inches, it fits the shallower base cabinets, bath vanities, and upper drawers where a longer slide will not clear.

Key Features

• Right-hand orientation: This is the right-hand slide only — pair it with the matching left-hand Quadro V6 15 inch slide to complete a working set.
• Full extension: The drawer member travels the full 15 inch nominal length, bringing the entire drawer out to the cabinet face.
• Integrated soft-close: A built-in damper catches the drawer near the end of travel and settles it shut without a slam.
• Ball-bearing carriage: Steel ball bearings run in formed raceways for smooth, precise travel under load — quieter and more consistent than nylon rollers at this capacity class.
• 90 lb capacity per pair: Covers loaded bath and kitchen drawers in this length class.
• Face-frame and frameless compatible: Installs in both cabinet constructions with the correct series hardware.

Where a 15 Inch Undermount Slide Fits

The 15 inch length targets the drawers that a standard 18 or 21 inch slide cannot serve. Shallower base cabinets with less than 18 inches of usable interior depth, bath vanity drawers, upper-bank drawers in a stacked configuration, and narrow drawer banks in island seating all land in this length class. Full extension at 15 inches means the back of even a compact drawer comes fully out to the face — useful when the drawer carries small items that settle to the rear. The 90 lb per pair rating is more than adequate for a drawer this size loaded with hardware, toiletries, or flatware.

Construction and Finish

The Quadro V6 body is steel with a zinc finish — a functional, corrosion-resistant surface suited to indoor cabinetry. Because the slide rides concealed beneath the drawer box, the zinc finish is a working finish rather than a decorative one. The ball-bearing carriage separates this runner from the roller-based undermounts in the same price range: bearings maintain consistent resistance under changing loads and hold up through high-cycle use better than nylon rollers at comparable ratings. The 4mm side clearance is tighter than the 1/2 inch standard of most side-mount slides, so drawer box width tolerances matter — build to the Hettich specification for the Quadro V6 series.

Who This Slide Is For

Cabinet shops producing bath vanities and compact kitchen configurations will stock the 15 inch length alongside longer sizes to cover the full range of drawer depths on a job. Designers specifying handle-less frameless work get a clean, concealed runner that disappears under the box and closes silently. Homeowners replacing worn or noisy slides in a shallow vanity or a narrow drawer bank get a direct upgrade path to ball-bearing precision and soft-close motion. In face-frame cabinets, rear mounting brackets are required to support the slide's back end — those brackets are Quadro-specific and sold separately, so order them with the slides rather than after.

The Right Slide in the Right Length

Match the 15 inch Quadro V6 right-hand slide to its left-hand mate, add the series hardware your cabinet construction calls for, and this concealed runner keeps compact drawers running quietly and precisely for the long haul.