Right-Hand Ball Bearing Undermount Slide for Frameless Cabinet Builds

This is the right-hand member of the Hettich Quadro V6 concealed undermount system in the 350mm nominal length — a full-extension, soft-close slide running on ball bearings, rated 90 lb per pair, designed for frameless cabinets with 1/2 to 5/8 inch drawer sides. It sells as a single right-hand slide; pair it with the matching left-hand Quadro V6 to make one working set.

Key Features

• Full extension brings the entire drawer box out to the cabinet face, giving complete access to the contents at the back.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently without slamming.
• Ball bearing construction delivers smooth, precise travel under load through years of daily use.
• 90 lb weight capacity per pair handles loaded kitchen, bath, and utility drawers with confidence.
• Right-hand orientation — order both hands to complete each drawer installation.
• Made for frameless cabinets, mounting directly to the cabinet side panel for a clean, production-ready install.

Where This Slide Fits the Job

The Quadro V6 in 350mm suits drawers that need concealed hardware, full rear access, and a controlled close — kitchen base drawers, bath vanity drawers, and case goods where the slide should disappear beneath the box. The 350mm nominal length pairs with a 13-9/16 inch minimum installation depth, so verify your cabinet interior runs at least that deep before ordering. Because this is a frameless-specific model, it mounts straight to the flat side panel without rear brackets — the clean-side panel of a production frameless box is all it needs for support.

Construction and Finish

Steel members with a zinc finish give the Quadro V6 the corrosion resistance it needs for long indoor service. Ball bearings running in precision raceways are what distinguish this slide from roller-based economy options — the carriage stays smooth and consistent under load, cycle after cycle. The concealed position beneath the drawer box means the zinc finish is functional rather than decorative; it handles the work quietly out of sight.

Who Orders This Slide

Production cabinet shops building frameless cases on the 32mm system will find the Quadro V6 integrates directly into their workflow — mounting holes align to standard line-bore patterns. Residential installers and custom shops specifying soft-close in a concealed slide for 1/2 to 5/8 inch drawer sides also reach for this series. It is the right fit when the job calls for full extension and ball bearing precision at the Hettich Quadro price point, without stepping up to a synchronized or electro-mechanical system.

Concealed Performance Where It Counts

Match the right-hand and left-hand Quadro V6 slides to your drawer box, confirm the cabinet depth, and add the series-specific locking devices — then this concealed runner delivers full-extension access and soft-close control on every pull.