Undermount Drawer Slide For Frameless Cabinets With Right-Hand Precision

This is the right-hand member of the Hettich Quadro V6 undermount system in the 420mm nominal length — a full-extension, soft-close concealed runner on ball bearings, rated 90 lb per pair, made for frameless cabinets with drawer sides from 1/2 to 5/8 inch thick.

Key Features

• Full-extension travel brings the entire drawer out to the cabinet face for complete access to the drawer interior.
• Integrated soft-close catches the drawer near the end of travel and settles it shut quietly without slamming.
• Ball-bearing carriage delivers a smooth, controlled pull under load across thousands of cycles.
• 90 lb weight capacity per pair covers loaded kitchen, bath, and utility drawers with confidence.
• Right-hand orientation — this is one member of the pair; a matching left-hand slide is required to complete the set.
• Zinc-finished steel construction holds up through years of indoor use, fully concealed beneath the drawer box.

Where the Quadro V6 Fits In Your Build

The Quadro V6 is Hettich's concealed undermount runner for frameless European-style cabinetry. At 420mm nominal length — with a minimum installation depth of 17-1/2 inches — it fits standard base cabinet runs without dead space behind the drawer. Full extension means the back of the box clears the cabinet face completely when the drawer is open, so no item gets buried at the rear. The integrated soft-close does its work in the last inch of travel, making it the right choice for kitchens and bath vanities where a quiet close is expected. The ball-bearing system keeps motion smooth whether the drawer is empty or loaded near the 90 lb pair rating.

Construction and Finish

The Quadro V6 runner is steel with a zinc finish — a functional, corrosion-resistant coating suited to indoor cabinetry. Because the slide mounts concealed beneath the drawer box, the finish serves protection rather than appearance: nothing is visible when the drawer is closed or open. The ball-bearing carriage is the performance element here, providing consistent, rattle-free travel that holds up across repeated use in production cabinet programs and custom residential work alike.

Who Orders the Right-Hand Single

Production cabinet shops are the primary buyer of this single-member bulk format. When lefts and rights are stocked separately by the case, the shop pulls what each drawer needs rather than opening paired sets. Custom shops building frameless boxes from 1/2 to 5/8 inch material — dovetailed maple, doweled Baltic birch, CNC-cut plywood — will find the Quadro V6 a reliable concealed runner at a capacity that covers the majority of kitchen and bath drawer loads. This SKU is the right-hand member only; order the matching left-hand 420mm Quadro V6 slide in equal quantity to complete each pair.

The Right Runner for Frameless Work That Has to Perform

When a frameless build calls for a concealed, full-extension runner with soft-close and ball-bearing motion, the Quadro V6 in 420mm covers that specification reliably — stock the right-hand and left-hand members together, build the box to Hettich's spec, and the drawer runs cleanly from the first install.