Hettich Quadro V6 480mm Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Right hand Zinc - 9047757

Hettich Quadro V6 480mm Drawer Slide Purpose

Hettich Quadro V6 480mm drawer slide defines this 480mm full extension undermount drawer runner as a concealed option for drawers that need complete access to stored contents while keeping hardware out of sight, which supports clean-looking installations. The full extension design lets the drawer travel the entire runner length, which helps installers deliver ergonomic reach to the back of the drawer. The right hand configuration specified by part number 9047757 positions this runner for use on the right side of the drawer system, which supports consistent layout in multi-drawer projects. The galvanised steel construction specified in the product data provides a rigid sliding member, which matters when drawers are loaded within the tested capacity and need stable travel. The product is classified under undermount drawer slides, so it works beneath the drawer box, which frees the cabinet side for tight reveals or decorative treatments. The Hettich America Corporation branding identifies a Quadro V6 platform component, which helps match this piece with other Quadro slide variants on the same job.

Key Quadro V6 Features For Cabinet Projects

• The integrated Silent System described in the web description adds soft closing performance to the runner, which helps drawers close smoothly and quietly in finished cabinetry.
• The slide on installation with latches described for this model allows the drawer to connect to the runner with a sliding engagement and latch, which supports straightforward drawer installation and removal during fitting.
• The stated tool-less height adjustment feature lets installers adjust drawer front height without tools, which speeds up fine tuning of reveals during alignment.
• The platform concept noted in the description uses identical cabinet body, drawer, and front panel dimensions for Quadro partial and full extension runners for slide on installation, which simplifies planning when mixing different Quadro extensions in the same cabinet run.
• The load capacity to EN 15338, Level 3 described for this runner shows it has been tested to that standard, which indicates suitability for drawers that must handle the loads associated with that performance level.
• The suitability for drawers with a side profile thickness of up to 16 mm lets this runner work with drawer box sides in that thickness range, which helps match common board and panel stock used in cabinetry.

Undermount Slide Fit And Installation Details

The slide on installation defined in the description establishes how the drawer connects to the runner, which gives installers a predictable workflow where the box slides onto the Quadro V6 and locks with latches. The tool-less height adjustment called out for this product allows vertical tuning of the drawer front directly at the runner, which is valuable when setting consistent gaps across a bank of drawers. The undermount drawer slide classification means the runner sits under the drawer side profile, which supports use with visible cabinet sides or tight face frame openings. The up to 16 mm side profile thickness specification gives a clear boundary for drawer material selection, which guides builders toward appropriate side panels that interface correctly with the Quadro system. The galvanised steel noted in the product data provides the slide members with a corrosion resistant surface, which supports stable motion over the service life in typical indoor woodworking environments.

Using This Hettich Right Hand 480mm Slide

Where This 480mm Undermount Slide Fits Best

The 480mm full extension length specified for this Quadro V6 runner suits medium-depth drawers, which helps reach stored items over standard cabinet depths in many kitchen or furniture layouts. The undermount drawer slide category places the hardware beneath the drawer box, which fits construction where the side profile is intended to remain clean or decorative. The product description lists suitability for drawers with a side profile thickness of up to 16 mm, which fits many engineered wood and solid timber drawer designs built around that metric dimension. The platform concept described for Quadro partial and full extension runners using identical cabinet body, drawer, and front panel dimensions means this 480mm full extension option fits into layouts already designed for Quadro slide-on runners, which benefits projects that mix storage types while maintaining a unified drilling pattern. The right hand orientation identified in the product name and SAP description defines this slide as the right side component in a Quadro V6 setup, which supports accurate positioning when paired with a corresponding left side element in the assembly.

Details That Support Repeatable Drawer Results

The integrated Silent System mentioned for this runner controls the closing action at the end of travel, which reduces impact forces on the drawer front and cabinet, supporting consistent alignment over time. The slide on installation with latches and the tool-less height adjustment described together provide both quick mounting and front height tuning at the hardware, which helps installers dial in uniform reveals without disassembling the drawer box. The load capacity tested to EN 15338, Level 3 reflects performance under a recognized standard, which offers confidence that drawers built around this Quadro V6 slide will carry loads appropriate to that level without compromising movement during normal service. The galvanised steel material noted in the description offers a robust base for the ball bearing mechanism referenced in the product name, which contributes to smooth running action as drawers move through full extension. The platform concept shared across Quadro slide on runners reduces variation in cabinet and drawer dimensions, which streamlines shop production and on-site installation when multiple drawer formats are used within the same project.

Common Questions About Quadro V6 480mm Slide

Selecting This Slide For Your Next Drawer Run

The Hettich Quadro V6 480mm drawer slide combines full extension travel, an integrated Silent System, and undermount placement, which together support clean cabinetry with controlled closing action. The platform concept for Quadro slide on runners means cabinet, drawer, and front panel dimensions stay consistent between partial and full extension applications, which benefits projects that mix storage types. The suitability for drawer side profiles up to 16 mm and the EN 15338, Level 3 load capacity position this runner for drawers built from common materials within that thickness range and loaded within the tested standard. The right hand orientation and galvanised steel construction described in the data give a defined role and material base within the Quadro V6 system, so this slide can be specified confidently wherever a 480mm soft close full extension undermount is required.