Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge is a concealed cabinet hinge designed for face-frame applications with 1/2 inch overlay and greater, so it lets the door cover the frame edge while staying hidden in use. The hinge opens to 106 degrees, giving doors ample swing for everyday cabinet access without requiring a wide opening angle. A cup depth of only 11 mm allows the hinge to work on most door styles, which helps when matching existing doors in a shop or jobsite retrofit. The hinge is designed to work with cabinet doors up to 3/4 inch thick, aligning with common stock thickness in cabinet construction workflows. All hinges are self-closing design, so doors pull in at the end of travel for consistent closing without separate closing devices.
Salice CSR3799 concealed hinge uses a hinge cup edge drilling distance of 2.5 mm, so the cup hole sits close to the door edge for the intended overlay geometry. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, meaning the open door does not project into the cabinet interior, which helps when drawers or rollouts sit directly behind the door. The hinge opens to 106 degrees, balancing access with controlled motion that stays within typical cabinet clearances. The hinge is designed to work with cabinet doors up to 3/4 inch thick, supporting use with standard solid wood and panel doors in many cabinet lines.
Salice 1/2 inch overlay hinge is targeted at face-frame cabinets where the door overlays 1/2 inch or more, which matches a common layout in kitchen and shop-built casework. Salice Series S face frame hinges provide perfect closing to any kind of door, supporting consistent shut across differing door sizes in the same run. Excentra face frame hinges with overlays of 1/2 inch and greater have zero door protrusion, so when the door is opened the edge stays clear of interior pullouts or sliding trays, which helps prevent interference in storage-heavy cabinets. The hinge cup depth of only 11 mm allows this hinge to be used on most door styles, so door designs with thinner profiles or panel details still accept the standard cup boring depth.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, which matches typical stock used by cabinet shops and serious DIY builders, reducing the need to change hinge lines between projects. All hinges are self-closing design, so once the door passes a certain point it pulls itself shut, giving a consistent finished appearance in kitchens, baths, and shop storage. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing a soft-close solution using devices intended to pair with this hinge body for predictable performance. Salice America provides this hinge with all steel one piece construction with nickel plating to resist corrosion, supporting long-term use in normal cabinet environments where moisture and handling are common.
This 2-cam adjustable hinge provides the best side to side adjustment in the industry, giving installers extra lateral travel to correct butt door problems after doors are hung. Excentra, two cam adjustment hinges provide cam depth adjustment from plus 2.8 mm to minus 0.5 mm, so the door can be set closer to or farther off the face frame, which helps correct proud or recessed door faces across a run. Excentra hinges provide cam lateral adjustment from plus 3.0 mm to minus 2 mm, which is useful when door edges rub or reveal gaps vary because that range allows fine tuning without remounting the hinge. Slotted screw hole height adjustment of plus or minus 2 mm lets the hinge shift the door slightly up or down, which brings top lines and bottom lines into alignment without altering the cup boring.
Salice Excentra S face frame hinge has a hinge cup edge drilling distance of 2.5 mm, so once the boring pattern is set in the shop, repeated doors will sit in a predictable overlay position, supporting efficient production. The opening angle of 106 degrees offers enough door swing to access interior contents while keeping the motion within typical clearances next to walls or adjacent cabinets, which simplifies layout decisions. Salice Excentra face frame hinges provide perfect closing to any kind of door, so combined with the self-closing design, installers can achieve consistent, even closes without relying on separate catches. The hinge is classified as a concealed cabinet hinge in the concealed face frame hinges category, which keeps hardware out of sight while maintaining adjustability from the interior side.
Salice Excentra S face frame hinge is designed for face-frame cabinets with overlays of 1/2 inch and greater, so it suits typical face-frame kitchen and built-in cabinet layouts.
Salice CSR3799 concealed hinge opens to 106 degrees, providing ample access to the cabinet interior while keeping the swing within common installation clearances.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common solid wood and panel door construction used in many cabinet shops.
The 2 cam adjustable cabinet hinge provides depth, lateral, and height adjustments, so installers can fine-tune reveals, correct rubbing doors, and align top and bottom lines after mounting.
The hinge cup edge drilling distance is 2.5 mm with a cup depth of 11 mm, setting the cup close to the edge for the intended overlay while fitting most common door styles.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing soft-close performance while using the same hinge layout.
Choose the Salice 106 degree face frame hinge CSR3799 when a concealed cabinet hinge is needed for 1/2 inch overlay or greater on face-frame cabinets. The 2-cam adjustable design, zero door protrusion, and self-closing action provide practical control over reveals, closing feel, and interior clearances. The hinge works with doors up to 3/4 inch thick using an 11 mm cup depth and 2.5 mm cup edge drilling distance, helping standardize boring patterns in the shop. Nickel plated steel one piece construction resists corrosion in normal cabinet environments, supporting long-term performance across residential and commercial cabinet runs.
Sold In: 1 Each
