Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra S 2 cam hinge is a concealed face frame hinge designed for 1/2 inch overlay cabinet doors where clean lines and reliable closing are required. As a concealed cabinet hinge, it keeps hardware hidden while controlling the door swing on face frame construction. The 106 degree opening angle lets the door open wide enough for everyday cabinet access without overextending the door. This hinge is self-closing, so the built-in closing action pulls the door shut, helping doors stay closed in normal shop and kitchen use. The hinge is part of the Salice Series S face frame line, which is engineered to provide precise closing on many types of cabinet doors used in woodworking projects and installations.
This face frame hinge is a screw-on style, so it fastens to the cabinet and door using screws rather than a clip system, which suits installers who prefer secure mechanical attachment. The hinge cup edge drilling distance is 2.5 mm, giving a clear reference when boring hinge cups so the door positions correctly relative to the edge. Excentra hinges with overlays of 1/2 inch and greater provide zero door protrusion, meaning the open door edge does not project into the cabinet opening, which helps reduce interference with interior pullouts or adjacent doors. The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common North American face frame door construction used in many shops.
This Salice face frame hinge with 1/2 inch overlay is suited to face frame cabinets where the door overlays the frame by at least one-half inch and needs a concealed hinge. The 106 degree opening angle supports typical access to cabinet interiors without over-rotating the door, which is useful for wall and base cabinets installed close to walls or appliances. Because the hinge is designed for doors up to 3/4 inch thick, it fits many standard rail-and-stile doors built in professional woodworking shops. The 11 mm cup depth allows it to work on a range of door profiles, so raised-panel or flat-panel constructions can be used without changing to a deeper bore pattern. On cabinets that house pullout trays or organizers, the zero door protrusion for 1/2 inch and greater overlays helps the open door stay clear of moving interior components.
The Excentra two cam adjustment system provides cam depth adjustment from plus 2.8 mm to minus 0.5 mm, which lets installers move the door in and out relative to the cabinet face for a consistent reveal. Cam lateral adjustment from plus 3.0 mm to minus 2 mm allows side-to-side movement, which is especially important for correcting butt door conditions where two doors meet on a narrow stile. Slotted screw hole height adjustment of plus or minus 2 mm offers vertical fine-tuning so doors line up across a run of cabinets without re-drilling. Because all hinges in this series are self-closing, the hinge helps pull the door into the final position after these adjustments are set, supporting uniform alignment from cabinet to cabinet. The one-piece steel construction with nickel plating provides a stable adjustment platform that holds these settings in typical kitchen and shop environments over time.
This hinge is specified for overlays of 1/2 inch and greater, so it supports applications where the door covers at least half an inch of the face frame.
This Salice Excentra hinge is designed to work with cabinet doors up to 3/4 inch thick, matching many standard face frame door constructions.
The Excentra cams provide depth adjustment from plus 2.8 mm to minus 0.5 mm and lateral adjustment from plus 3.0 mm to minus 2 mm, supporting precise door positioning.
This hinge uses slotted screw hole height adjustment of plus or minus 2 mm, allowing vertical fine-tuning of the door on the cabinet.
For overlays of 1/2 inch and greater, zero door protrusion keeps the open door from projecting into the opening, helping interior pullouts and adjacent fronts clear more easily.
The self-closing design pulls the door shut as it nears the cabinet, helping doors seat consistently without relying on magnetic catches or additional closing devices.
The CSP3799 Salice Excentra S face frame hinge combines a 1/2 inch overlay rating, 106 degree opening angle, and two cam adjustment for depth and lateral movement, which helps deliver straight, even cabinet doors. The 11 mm cup depth and suitability for doors up to 3/4 inch thick match many shop-built doors without changing standard boring practices. With all steel one-piece construction, nickel plating for corrosion resistance, and a self-closing design, this hinge fits professional face frame cabinet runs where reliable function and clean appearance are critical. For projects using Salice Type U soft-close devices, this hinge is designed to work with those components, supporting a smooth upgrade path across a job.
Sold In: 1 Each
