Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge is a concealed cabinet hinge designed for 1 inch overlay face-frame doors, so it lets you build or retrofit full overlay face-frame cabinets while keeping the hardware hidden. This hinge belongs to the Salice Series S face frame hinges, which provide perfect closing to any kind of door, giving doors a consistent, controlled close across a run of cabinets. The hinge uses a dowel mounting style, which offers a precise, repeatable installation into prepared face-frame holes. A cup depth of only 11 mm allows this hinge to be used on most door styles, so you can keep one drilling pattern across a variety of fronts. The hinge opens to 106 degrees, which gives good interior access while keeping the swing within normal kitchen and bath clearances.
This concealed face frame hinge is designed to work with cabinet doors up to 3/4 inch thick, giving reliable fit on typical kitchen and bath doors. The 1 inch overlay geometry suits face-frame cabinets where the door needs to cover a full inch of face frame, supporting common full-overlay layouts. The two cam adjustment system concentrates side-to-side and in-and-out control at the hinge, so installers can dial in fit after boring and mounting. Slotted screw hole height adjustment of plus or minus 2 mm further lets you tweak the door position on the frame, reducing time spent pulling doors off to correct small layout variances.
This Salice CSR3299N concealed hinge is a face frame hinge for 1 inch overlay applications, so it suits cabinet runs where the door edges must cover generous face frames while staying fully concealed. The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching many framed kitchen, bath, and built-in cabinet door constructions. A hinge cup depth of only 11 mm allows this hinge to be used on most door styles, which is helpful when working with thinner profiles or routed panels where deeper cups could weaken the stile. The hinge cup edge drilling distance of 2.5 mm defines a compact boring location near the door edge, supporting consistent machining on production equipment or jigs. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so you can add soft-close control while keeping the same basic hinge layout.
This 2-cam adjustable hinge provides the best side to side adjustment in the industry to ensure butt door problems are resolved, which helps installers quickly correct doors that bind or touch in the center. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm and cam lateral adjustment from plus 3.0 mm to minus 2 mm give a generous adjustment envelope, allowing accurate alignment across uneven walls or face frames. Slotted screw hole height adjustment of plus or minus 2 mm adds vertical flexibility, so door tops and bottoms can be aligned along a bank of cabinets without changing initial boring heights. The hinge opens to 106 degrees, providing a wide, functional swing angle for daily access. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, which keeps doors from projecting into the opening when fully opened, supporting interior pullouts. Salice Excentra face frame hinges have all steel one piece construction with nickel plating to resist corrosion, which supports long service life in typical residential cabinet environments. All hinges are self-closing design, so doors are pulled shut at the end of travel, giving a consistent close without separate catches. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so soft-close performance can be added around this hinge geometry while maintaining the same door preparation.
This hinge is a concealed face frame hinge for 1 inch overlay doors, so it suits framed cabinets where the door must cover 1 inch of face frame and the hardware stays hidden.
This hinge is designed to work with cabinet doors up to 3/4 inch thick, matching many standard kitchen, bath, and built-in framed door constructions.
This hinge has a 106 degree opening angle, providing ample door swing for everyday cabinet access while keeping movement within typical installation clearances.
This hinge offers cam depth adjustment from plus 2.8 mm to minus 0.5 mm and cam lateral adjustment from plus 3.0 mm to minus 2 mm, plus slotted height adjustment of plus or minus 2 mm.
The 11 mm cup depth allows this hinge to be used on most door styles, helping maintain door strength when boring cups into thinner or profiled stiles.
With overlays of 1/2 inch and greater, this hinge has zero door protrusion, so open doors do not project into the cabinet opening, aiding interior pullout clearance.
Choose this Salice Series S face frame hinge when you need a concealed hinge for 1 inch overlay doors on framed cabinets and want strong adjustment control during installation. The 2-cam system, 106 degree opening, and 11 mm cup depth support a wide range of door styles. All steel one piece construction with nickel plating to resist corrosion and self-closing design give dependable everyday operation on 3/4 inch thick doors in typical cabinet projects.
Sold In: 1 Each
