Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge gives a 1-1/4 inch overlay on face-frame cabinets, so you can match doors to common overlay layouts in kitchen and built-in work. This hinge is a concealed cabinet hinge, keeping hardware hidden so finished runs look clean on visible installations. Salice Series S face frame hinges provide perfect closing to any kind of door, which helps doors seat consistently against the frame on everyday use. All hinges are self-closing design, so doors pull themselves shut from the final part of travel instead of sitting slightly open. The hinge offers a 106 degree opening angle, allowing doors to open wide enough for comfortable access while keeping swing controlled on adjacent cabinets.
This hinge is designed to work with cabinet doors up to 3/4 inch thick, so it fits typical face-frame door construction in kitchens, baths, and shop projects using that thickness range. Hinge cup edge drilling distance is 2.5 mm, giving a fixed reference from the door edge that supports repeatable boring setups across multiple doors. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, which allows doors to open without projecting into the cabinet interior and helps with tray or drawer clearance behind the door. Salice Excentra face frame hinges have all steel one piece construction with nickel plating to resist corrosion, supporting long service in normal cabinet environments where humidity and handling are common.
Salice Series S face frame hinges provide perfect closing to any kind of door, which supports consistent performance across mixed cabinet runs in the same project. The hinge is part of the concealed cabinet hinges product class, so it is suited to kitchens, baths, and built-ins where visible hardware on the frame is not desired. Hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common door builds from plywood or solid lumber in that thickness. A cup depth of only 11 mm allows this hinge to be used on most door styles, which is helpful when working with profiled doors where deeper boring could break through thin panels or decorative routes. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, making this CSP3A99N hinge practical where interior pull-outs, roll-outs, or stored items sit close behind the door.
This 2-cam adjustable hinge provides the best side to side adjustment in the industry to ensure butt door problems are resolved, so you can correct rubbing stiles or uneven gaps without rebuilding a door. Excentra, two cam adjustment hinges provide cam depth adjustment from plus 2.8 mm to minus 0.5 mm, letting you fine-tune how the door sits against the face frame after the cabinet is screwed to walls or other cases. Excentra, two cam adjustment hinges provide cam lateral adjustment from plus 3.0 mm to minus 2 mm, which is valuable when pairs of doors need tight, even margins along a shared meeting line. Excentra, two cam adjustment hinges provide slotted screw hole height adjustment of plus or minus 2 mm, so you can straighten a door that appears low on one side of a run by minor vertical movement rather than re-drilling. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing you to add soft-close action at the hinge area when that device is used on the cabinet. Salice Excentra face frame hinges have all steel one piece construction with nickel plating to resist corrosion and have a lifetime warranty, supporting long-term cabinet performance where hinges are adjusted repeatedly during installation and later alignment.
The hinge gives a 1-1/4 inch overlay on face-frame cabinets, so the door covers that amount of the frame and matches layouts designed around that overlay dimension.
The hinge has a 106 degree opening angle, which provides wide access to the cabinet interior while keeping the door swing controlled near adjacent doors or walls.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, fitting common kitchen and bath door construction using that thickness.
The Excentra two cam system provides depth, lateral, and height adjustments, so you can move the door in three directions to correct reveals and resolve butt door issues.
The hinge has a cup depth of 11 mm and a hinge cup edge drilling distance of 2.5 mm, giving consistent boring references for most door styles.
The Excentra face frame hinge is designed to work with Salice Type U soft-close devices, allowing soft-close action when that device is used on the cabinet.
The Salice Excentra S face frame hinge with 1-1/4 inch overlay, 106 degree opening, and self-closing design brings a concealed option suited to typical 3/4 inch doors in face-frame cabinetry. The two cam adjustment for depth, lateral, and height creates room to dial in reveals and resolve butt door problems during installation. All steel one piece construction with nickel plating and a lifetime warranty provides a long-term hinge solution for cabinet runs that will see regular use. For jobs needing a concealed face-frame hinge that can later work with Salice Type U soft-close devices, this CSP3A99N hinge offers the verified adjustment range and overlay needed for precise cabinet work.
Sold In: 1 Each
