Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra 1-5/16 overlay hinge is a concealed, self-close face frame hinge designed for cabinet doors, so it keeps hardware hidden while pulling the door shut for a clean, functional installation. As part of the Salice Series S face frame hinges, it provides closing suited to many kinds of cabinet doors, which helps one hinge line handle varied casework. The hinge opens to 106 degrees, giving workable access into the cabinet while still controlling door swing. It is built as an all steel one piece construction, which creates a solid, unified hinge body for dependable movement. The nickel plating resists corrosion, so the hinge maintains smooth function and appearance in normal cabinet environments over time. Classified as a concealed cabinet hinge, it fits projects where visible surface hinges are not desired.
This Salice Excentra S concealed hinge is a screw-on face frame design, so it attaches to the cabinet with screws for a straightforward mounting method. The hinge cup edge drilling distance is 2.5 mm, guiding where to bore the cup from the door edge for repeatable setups. The Excentra two cam adjustment system provides cam depth adjustment from plus 2.8 mm to minus 0.5 mm and cam lateral adjustment from plus 3.0 mm to minus 2 mm, so the door can be shifted in and out and side to side after mounting. A slotted screw hole height adjustment of plus or minus 2 mm lets the door move up or down slightly, helping dial in parallel reveals along the cabinet.
This Salice face frame cabinet hinge is part of the Salice Series S face frame hinges, so it is intended for face frame cabinet construction rather than frameless work. The 1-5/16 inch overlay specification sets it up for cabinets where that overlay dimension is required across the door run. With a cup depth of only 11 mm, the hinge suits most door styles, which helps when working with doors that cannot accept deeper cup recesses. It is designed to work with cabinet doors up to 3/4 inch thick, aligning with common door stock used in many shops. The 106 degree opening angle supports normal cabinet access, while Excentra hinges with overlays of 1/2 inch and greater providing zero door protrusion keep the door from entering the cabinet opening when open, aiding the function of interior storage solutions.
The Excentra 2 cam adjustable cabinet hinge uses a two-cam adjustment layout, which offers separate control over depth and lateral positioning for more precise alignment. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm allows the door to move closer to or farther from the cabinet face, helping tune how tightly the door sits against the face frame. Cam lateral adjustment from plus 3.0 mm to minus 2 mm shifts the door side-to-side, which helps resolve butt door problems when adjacent doors meet. A slotted screw hole height adjustment of plus or minus 2 mm lets the installer move the door up or down slightly, tying the top and bottom gaps into a consistent line. All hinges are self-closing design, so once adjusted, the hinge action pulls the door closed into that alignment on every cycle.
The Salice Excentra S face frame hinge is designed for face frame cabinets, so it matches projects where doors overlay a frame rather than a frameless box.
This hinge provides a 1-5/16 inch overlay, so door layout can be planned to cover that amount of the face frame on each side of the opening.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, fitting common kitchen and bath door constructions.
This hinge has a cup depth of 11 mm, so the door boring operation follows that depth to house the hinge cup correctly.
The Excentra two cam system provides depth adjustment from plus 2.8 mm to minus 0.5 mm and lateral adjustment from plus 3.0 mm to minus 2 mm for alignment.
Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so soft-close action can be added where those devices are used.
The Salice Excentra S 2 cam self-close 1-5/16 inch overlay face frame hinge CSP3B99N combines a 106 degree opening angle, 11 mm cup depth, and 1-5/16 inch overlay, so it addresses many face frame cabinet layouts. Its all steel one piece construction with nickel plating supports long-term hinge performance in cabinet use. The 2 cam adjustment, plus the slotted height adjustment, offers practical fine-tuning of reveals and butt door conditions. For cabinet work built around Salice Type U soft-close devices and concealed hardware, this hinge provides a targeted option that aligns door overlay, thickness, and adjustment needs in one component.
Sold In: 1 Each
