Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge with 1-1/8 inch overlay is a concealed cabinet hinge designed for face-frame construction, so cabinet doors close cleanly while keeping hardware hidden from view. This 106 degree screw-on hinge is part of the Salice Series S face frame line, which is designed to provide perfect closing to any kind of door. The hinge uses a self-closing design, so doors are pulled shut at the end of travel for consistent closing on every use. Its all steel one piece construction with nickel plating resists corrosion, supporting long-term performance in typical cabinet environments. This concealed face frame hinge is designed to work with cabinet doors up to 3/4 inch thick, aligning the overlay and motion for common kitchen and bath door builds. As a Salice Excentra face frame hinge, CSP3199N is also designed to work with Salice Type U soft-close devices, supporting upgraded closing control when those devices are used.
This Salice concealed face frame hinge uses screw-on mounting, so the hinge is secured to the face frame and door with screws driven directly through the hinge plates. A hinge cup edge drilling distance of 2.5 mm sets the relationship between the 35 mm cup bore and the edge of the door, giving a consistent starting point for overlay and reveal across multiple doors. The 11 mm cup depth works with most door styles while maintaining solid material under the cup, which supports long-term hold in the bore. Designed for face-frame cabinets with a 1-1/8 inch overlay, the hinge layout supports typical American-style face-frame proportions, helping doors cover the frame correctly when bored and installed to the stated dimensions.
Salice Series S face frame hinges provide perfect closing to any kind of door, so they can be used across different cabinet lines where consistent close is important. All hinges in this Excentra line are self-closing design, so doors are pulled shut in the last part of travel, reducing partially open doors in kitchens, baths, and casework. The hinge is designed to work with cabinet doors up to 3/4 inch thick, covering a standard range for residential and commercial doors while keeping overlay and motion within specification. With a 106 degree opening angle, doors swing open wide enough for typical cabinet access while still controlling projection at the front. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, meaning the door edge does not extend into the cabinet interior at full opening, which helps when shelves or pullouts need clear access in front of the opening.
This 2-cam adjustable hinge provides the best side to side adjustment in the industry, giving installers more lateral range at the hinge to solve butt door problems after mounting. Cam lateral adjustment from plus 3.0 mm to minus 2 mm allows doors to be shifted toward or away from neighboring doors, which helps center reveals and prevent binding on face frames. Cam depth adjustment from plus 2.8 mm to minus 0.5 mm moves the door in and out relative to the cabinet face, supporting flush alignment of door fronts with adjoining cabinets or appliances. Slotted screw hole height adjustment of plus or minus 2 mm provides vertical tuning without plugging and redrilling, which speeds up field fitting on tall stacks or banks of doors. Because Salice Excentra face frame hinges are designed to work with Salice Type U soft-close devices, the same hinge setup can later support soft-close upgrades, keeping alignment intact while only adding the soft-close device to modify the closing behavior.
The hinge is a face-frame concealed cabinet hinge, so it is intended for face-frame cabinet construction where the hinge mounts to the frame and remains hidden when the door is closed.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, which matches common door stock thickness used in many kitchen, bath, and casework projects.
The hinge has a 1-1/8 inch overlay, so the door is designed to overlap the face frame by that amount, helping achieve the intended coverage of the cabinet opening.
The hinge has a 106 degree opening angle, giving a wide swing for access while maintaining controlled door movement at the front of the cabinet.
The hinge offers cam depth adjustment from plus 2.8 mm to minus 0.5 mm and cam lateral adjustment from plus 3.0 mm to minus 2 mm, plus slotted screw height adjustment of plus or minus 2 mm.
The hinge has all steel one piece construction with nickel plating, which resists corrosion and supports long-term performance in normal cabinet environments.
The Salice Excentra S face frame hinge CSP3199N combines a 1-1/8 inch overlay, 106 degree opening, and self-closing design with 2-cam adjustment for precise door alignment on face-frame cabinets. Its all steel one piece construction with nickel plating resists corrosion, supporting dependable service across cabinet runs. The hinge is designed for doors up to 3/4 inch thick and works with Salice Type U soft-close devices, allowing consistent hardware across standard cabinet lines. For projects needing concealed face frame hinges with generous adjustment and zero door protrusion at overlays of 1/2 inch and greater, this Salice Series S model offers a practical, repeatable solution.
Sold In: 1 Each
