
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice Excentra S face frame hinge is a concealed cabinet hinge that provides perfect closing to any kind of door, so cabinet doors shut consistently and cleanly on face-frame constructions. This hinge is classified as a Salice Series S face frame hinge, which means it is engineered specifically for face frame cabinets where a 1-3/8 inch overlay is required on the frame. The hinge offers 106 degree opening, which allows doors to swing open to a practical angle while helping maintain controlled door movement in everyday use. As a self-closing design, the hinge pulls the door shut at the end of travel, which helps doors stay closed without extra latches during regular operation. Being part of Salice concealed cabinet hinges, it stays hidden when the door is closed, so projects maintain a clean, uninterrupted exterior appearance while the hinge geometry handles the movement.
Excentra, two cam adjustment hinges provide cam depth adjustment from plus 2.8 mm to minus 0.5 mm, which lets the installer fine-tune how far the door sits in or out relative to the face frame after mounting. These hinges also provide cam lateral adjustment from plus 3.0 mm to minus 2 mm, allowing precise side to side door movement that helps align gaps and correct butt door conflicts along a run. Slotted screw hole height adjustment of plus or minus 2 mm gives additional vertical movement on the mounting, so doors can be raised or lowered slightly to align tops and bottoms across multiple openings. The hinge cup edge drilling distance is 2.5 mm, which defines the setback for boring the hinge cup hole and helps produce repeatable drilling patterns across several doors. Hinge is a screw-on design, so fastening uses screws through the hinge plate and cup for a secure connection to both door and face frame.
Salice Series S face frame hinges provide perfect closing to any kind of door, so they serve well in cabinet projects that use varied door styles on face frame construction, from kitchens to utility cabinets. The hinge is designed to work with cabinet doors up to 3/4 inch thick, which aligns with common solid wood and panel door builds in many installations. A cup depth of only 11 mm allows this hinge to be used on most door styles, helping when doors have limited thickness but still require a concealed hinge cup. Excentra hinges with overlays of 1/2 inch and greater have zero door protrusion, so in layouts where the overlay meets that requirement, the open door does not project into the cabinet opening and can improve access to interior storage. The hinge offers 106 degree opening, which gives a generous swing angle suitable for day-to-day cabinet access while keeping the door movement within a controlled arc.
This 2-cam adjustable hinge provides the best side to side adjustment in the industry, giving considerable lateral control when butt doors meet at the center of a cabinet and reducing the chance of binding or uneven reveals. Excentra, two cam adjustment hinges provide cam depth adjustment from plus 2.8 mm to minus 0.5 mm, so the door can be brought closer to or further from the face frame after hanging to refine the visual alignment. Cam lateral adjustment from plus 3.0 mm to minus 2 mm lets the installer shift the door along the horizontal plane, which is critical when spacing multiple doors evenly across a bank of cabinets. Slotted screw hole height adjustment of plus or minus 2 mm supports fine vertical tuning, which helps line up top rails or bottom edges without redrilling holes. Salice Excentra face frame hinges have all steel one piece construction with nickel plating to resist corrosion, which means the adjustment settings are supported by a rigid hinge body and a corrosion-resistant finish suited to typical cabinet environments. Excentra face frame hinges are designed to work with Salice Type U soft-close devices, so projects that require soft closing can integrate those devices with this hinge family while keeping the same core hinge geometry on the door.
The Salice Excentra S face frame hinge is specified as a 1-3/8 inch overlay hinge, which positions the door to cover that amount of the face frame in the design.
The Salice Excentra face frame hinge is designed to work with cabinet doors up to 3/4 inch thick, matching many standard cabinet door constructions.
The Salice Excentra hinge provides a 106 degree opening, which allows cabinet doors to swing open to a practical angle for regular access.
The Excentra 2 cam adjustable hinge offers depth and lateral cam adjustments, along with slotted height adjustment, so door position can be tuned in three directions after installation.
The Salice Excentra hinge uses an 11 mm cup depth and a hinge cup edge drilling distance of 2.5 mm, guiding door boring setup for consistent hinge placement.
The Excentra face frame hinges are designed to work with Salice Type U soft-close devices, allowing soft closing function to be added using that device family.
The Salice Excentra S face frame hinge as CSP3C99N combines self-closing function with concealed mounting, so face frame cabinets gain a clean appearance and automatic door closing. Its 1-3/8 inch overlay identity and 106 degree opening make it suitable where that overlay and swing angle fit the layout. The hinge is designed to work with cabinet doors up to 3/4 inch thick, covering many common door builds. With all steel one piece construction and nickel plating to resist corrosion, it supports long-term cabinet use in typical environments. The 2-cam adjustable design with depth, lateral, and height adjustments helps align doors accurately, reducing rework on butt doors and multi-door runs. For cabinet projects using Salice Type U soft-close devices, this Excentra hinge family is designed to work with those devices while handling the main door movement.
Sold In: 1 Each