Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Excentra face frame hinges give cabinet builders a concealed hinge solution for 1 inch overlay face-frame doors that need consistent closing and alignment. This concealed cabinet hinge is a Salice Excentra S 2-cam self-close design, so the door is pulled shut without separate catches, which keeps layouts cleaner on higher volume jobs. The hinge opens to 106 degrees, giving access to the cabinet while controlling door swing, which helps when doors are close to walls or adjacent cabinets. An 11 mm cup depth lets this hinge work on most door styles, so one hinge type can often cover a wider range of fronts in the same run. The nickel-plated, all-steel one-piece construction resists corrosion in typical cabinet environments, which supports long service life. The hinge is designed to work with doors up to 3/4 inch thick, matching common kitchen and bath door construction.
This Salice 1 inch overlay hinge is a face-frame concealed hinge, so it mounts to the face frame while the cup bores into the door, leaving the hardware hidden when the door is closed. The screw-on installation style means the hinge is secured with screws through the mounting points, which suits standard shop tooling and field adjustments. The design is intended for cabinet doors up to 3/4 inch thick, so it fits typical residential and light commercial cabinet door construction. The 2-cam system handles depth and side-to-side setting from the hinge body, which helps correct small drilling variations without re-boring. With 106 degrees of opening, the hinge gives good access while maintaining control over door swing relative to adjacent cabinets.
This Salice Excentra S hinge is designed as a concealed cabinet hinge for face-frame cabinets using 1 inch overlay doors, so it fits projects where the door overlays most of the frame. The hinge cup depth of 11 mm lets it work with many door styles, including thicker center panels or profiled fronts, so door design options remain open within typical 3/4 inch constructions. Because Excentra face frame hinges provide perfect closing to any kind of door, they suit mixed door styles across a single job, helping maintain a uniform close across flat and profiled doors. The 106 degree opening angle suits kitchen, bath, or built-in cabinetry where full 165-degree swing is not required but easy access is still needed. This hinge is also designed to work with Salice Type U soft-close devices, so projects that need soft-closing action can add that function while keeping the same hinge body and overlay layout.
The 2-cam adjustable hinge provides structured depth and lateral adjustments, so installers adjust overlay and side gaps with a screwdriver rather than moving the cup bore, which saves time on both new installs and replacements. Depth adjustment from plus 2.8 mm to minus 0.5 mm lets the door sit properly relative to the face frame, which helps align adjacent doors and keep faces flush on long runs. Lateral movement from plus 3.0 mm to minus 2 mm addresses butt door problems by shifting doors horizontally, which reduces edge binding and uneven gaps where doors meet. The slotted screw hole height adjustment of plus or minus 2 mm gives small vertical shifts, so top and bottom reveals can be evened out after hanging all doors. All hinges in this series are self-closing design, which pulls doors closed from the last few degrees and helps doors stay shut under normal use. The nickel-plated all-steel one-piece construction with corrosion resistance supports long-term performance in typical interior cabinet environments. Excentra face frame hinges also carry a lifetime warranty, giving shops and installers a predictable component for repeat work and service commitments.
The Salice CSP3299N hinge is a concealed face-frame hinge for 1 inch overlay doors, so it suits face-frame cabinets where the door covers most of the frame.
The Salice Excentra S hinge opens to 106 degrees, which gives good interior access while controlling door swing near walls, appliances, or adjacent cabinets.
The hinge is designed to work with cabinet doors up to 3/4 inch thick, matching common kitchen, bath, and built-in cabinet door constructions.
The 2 cam system provides depth and lateral adjustment, so installers fine-tune overlay and side gaps at the hinge instead of re-boring or shifting the door.
The 11 mm cup depth lets the hinge work on most door styles, so many flat or profiled 3/4 inch doors can use the same bore depth in production.
The Excentra face-frame hinge is designed to work with Salice Type U soft-close devices, so soft-closing action can be added while keeping the same hinge layout.
Salice Excentra face frame hinges with 1 inch overlay, 106 degree opening, and 2-cam adjustment give cabinet shops and installers a concealed hinge that supports accurate alignment and self-closing action on face-frame cabinets. The 11 mm cup depth, 2.5 mm cup edge drilling distance, and support for doors up to 3/4 inch thick let this hinge fit many standard door programs without changing boring patterns. When projects call for a concealed face-frame hinge that works with Salice Type U soft-close devices, this CSP3299N model from Salice America provides a practical option for repeatable installs.
Sold In: 1 Each
