Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8400 drawer slides are 14 inch full extension, ball bearing, side mount slides that let a drawer open its full length, which helps when access to the back of the drawer matters on the job. The white finish gives a clean look in cabinets where slides can be seen in normal use, supporting consistent appearance across a run. The slide design is non-handed, so the same member style works on either side of the drawer or cabinet, which can streamline layout and reduce part sorting during assembly. A lever disconnect feature allows the drawer member to be separated from the cabinet member when needed, which aids in handling wide or heavy drawer boxes during installation or adjustments. The ball retainer latch works with the ball bearing action to help the members stay engaged in operation, supporting repeatable slide movement in service.
These Knape and Vogt side mount drawer slides are part of the 8400 Series, so they follow that line's side mount layout for use on the cabinet sides and drawer sides. The specified 1/2 inch plus 1/32 inch minus 0 inch side clearance per side defines the working gap, which drives drawer box width relative to the opening and helps achieve smooth travel without binding. The slide height of 1-13/16 inch gives a fixed vertical footprint, so installers can stack drawers or plan interior components around that dimension. The 32 mm pattern capability lines the slides up with standard system holes, creating consistent screw positions when a 32 mm construction method is used.
The 8400B WH 14 designation identifies these as Knape and Vogt 8400 Series slides in a white finish at 14 inch length, which suits drawer openings sized around that depth. Being side mount slides, they attach to the cabinet sides and the drawer sides, which makes them well suited to face frame or frameless cabinets that are planned for side-mounted runners. The non-handed design means the same slide components function on the left or right, which can simplify planning for banks of drawers that repeat the same hardware. With full extension travel, the drawer box can pull out to expose the full interior length, which matters when access to stored items at the back of the drawer is important. The ball bearing construction supports this travel along the members under load, giving the slide its operating movement.
The 32 mm pattern capability on these Knape and Vogt 8400 drawer slides lines up mounting points with 32 mm cabinet drilling, which supports consistent installation from one cabinet to the next when a line-boring system is in use. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side sets a clear design dimension, so drawer box widths can be calculated directly from the opening for a running fit along the ball bearings. The slide height of 1-13/16 inch provides a known vertical size, which helps maintain clearances between stacked drawers or between a drawer and a fixed shelf. The lever disconnect on the 8400 Series lets the drawer member separate from the cabinet member for drawer removal, which can simplify adjustments, finishing steps, or service work where removing the drawer improves access. The ball retainer latch works with the ball bearing system to keep the members engaged in use, supporting reliable engagement during opening and closing.
The 8400B WH 14 is a Knape and Vogt 8400 Series side mount, ball bearing, full extension drawer slide in a white finish, which defines how it mounts and how far the drawer can travel.
These Knape and Vogt 8400 drawer slides are 14 inches long, so they are suited to drawer and cabinet designs planned around a 14 inch full extension runner length.
The 8400B WH 14 drawer slide requires 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, which guides the relationship between drawer box width and cabinet opening.
The Knape and Vogt 8400 Series slide has a 32 mm pattern, so its mounting points align with 32 mm boring systems used in many cabinet constructions.
The 8400B WH 14 slide height is 1-13/16 inch, which helps plan drawer side heights and vertical clearances when stacking multiple drawers in a cabinet.
The Knape and Vogt 8400B WH 14 slide uses a lever disconnect, letting the drawer member release from the cabinet member to assist with drawer removal or reinstallation.
The Knape and Vogt 14 inch full extension 8400B WH 14 side mount drawer slide combines ball bearing action, a non-handed layout, and a white finish in a defined 1-13/16 inch height with 1/2 inch plus 1/32 inch minus 0 inch side clearance. For projects built around 32 mm pattern drilling and 14 inch deep drawers, these slides offer a matching runner with lever disconnect and ball retainer latch that supports straightforward mounting and normal drawer service in cabinet work.
Sold In: 10 Set
