Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8400 drawer slide is a 16 inch full extension side mount ball bearing slide that lets drawers open their full length, so the full 16 inch depth is accessible when loading, organizing, or servicing contents in the cabinet. The 8400 Series design uses ball bearings, which support smooth travel along the drawer member, helping drawers move consistently under typical cabinet loads. This model is classified as a side mount drawer slide, so it positions on the cabinet sides and aligns with standard casework that is already laid out for side mounting. The slide uses a 32 mm pattern, so hole locations line up with cabinet construction based on 32 mm system boring, which speeds layout and repeat drilling. This version has a white finish, which visually blends with white casework and offers a different look than standard zinc-colored slides.
The KV Model 8400 in 16 inch length uses a specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, which sets the target gap between cabinet member and drawer box for proper slide engagement. The slide height is 1-13/16 inch, so drawer side height and notching can be laid out to clear this profile while still supporting the drawer bottom. This 8400 Series version uses lever disconnect, which allows the drawer member to separate from the cabinet member at the lever, supporting removal of the drawer box during installation, finishing, or later service work. The slide is non-handed, so the same part serves both left and right positions on the cabinet, streamlining part stocking and installation flow on larger projects.
The 8400B WH 16 slide is a side mount drawer slide designed for use on cabinet sides where a 16 inch full extension travel is appropriate for the drawer depth. The defined side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side sets the operating envelope for drawer box width, which is important when sizing multiple drawers in a shared cabinet opening. Because the slide height is 1-13/16 inch, it occupies a modest vertical band along the drawer side, which can be considered when balancing drawer side height with interior storage height. The 32 mm pattern allows this slide to integrate with cabinet boxes laid out around 32 mm line boring, which is common in many shop systems. As a non-handed slide, the same model works on either side of the drawer, which supports straightforward planning when multiple drawers use the same hardware in a stack.
The full extension function on this 8400 Series slide means the drawer box moves fully out to the 16 inch slide length, which helps installers and builders standardize on a known opening stroke when planning face frame or frameless fronts around adjacent components. The lever disconnect feature allows the drawer member to separate from the cabinet member using the lever, which aids in fitting the cabinet members first, then attaching the drawer members to the box where access is better. The ball retainer latch feature helps hold the ball retainers in place within the slide assembly, which supports consistent operation after repeated drawer cycles. The recommended fasteners are #7 x 1/2 inch Phillips truss head, so hole sizing and driver selection can be matched to that specification when mounting the slide members to cabinet and drawer. The white finish offers a coordinated appearance in installations where the hardware is visible when drawers are open.
The 8400B WH 16 is a Knape and Vogt 8400 Series side mount ball bearing drawer slide, which supports smooth lateral movement along the cabinet and drawer sides.
The 16 inch full extension drawer slide allows the drawer to travel the full 16 inch slide length, so the entire drawer depth can be accessed during use.
The KV Model 8400 slide specifies 1/2 inch plus 1/32 inch minus 0 inch side clearance per side, which defines the drawer box width relative to the cabinet opening.
The 8400 Series white drawer slide has a height of 1-13/16 inch, which affects how the slide sits along the drawer side and how high the drawer sides can be.
The 8400B WH 16 uses a lever disconnect, so the drawer member can be separated from the cabinet member using the lever during installation or service.
The web description lists #7 x 1/2 inch Phillips truss head fasteners as recommended, which guides fastener choice and drill size when mounting slide members.
The Knape and Vogt 8400 drawer slide in 16 inch length combines full extension travel, side mount configuration, and ball bearing operation in a white finish suited to many cabinet interiors. The defined side clearance, 1-13/16 inch height, and 32 mm pattern give predictable layout points for shop drawings and field installs. With lever disconnect, non-handed design, and the specific 8400B WH 16 part number, this model fits projects that need consistent slide behavior across multiple drawers. Use these verified dimensions and features to match this slide to cabinet openings that are already planned for 16 inch full extension side mount hardware.
Sold In: 210 Set
