Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8400 drawer slides in the 22 inch length provide full extension, so the drawer travels completely out of the cabinet, allowing direct access to the full drawer depth during installation, adjustment, and everyday use. The side mount design places the slides on the drawer sides, fitting standard casework layouts where side-mounted hardware is preferred. A ball bearing construction supports smooth drawer movement, which helps reduce sticking during alignment and in regular operation. The hold-in anti-rebound feature keeps the drawer in the closed position, which matters when aligning faces and maintaining a consistent front reveal. A ball retainer latch secures the moving components, supporting dependable slide action under repeated cycling. The slides are non-handed, so each member can be used on either side, simplifying layout and reducing the chance of orientation errors during installation on multiple cabinets.
The KV Model 8400 22 inch length side mount configuration places the slides on the cabinet and drawer sides, aligning with common face frame and frameless cabinet construction. The specified 1/2 inch plus 1/32 inch minus 0 inch side clearance per side sets a tight tolerance window, which guides drawer box width during fabrication so the slides run smoothly without excess play. A height of 1-13/16 inch defines the minimum vertical area on the drawer side where the member can be fastened, helping avoid conflicts with notches or cutouts. The 32 mm pattern supports line-bored cabinet sides, which streamlines installation in system-based shops. Lever disconnect functionality allows the drawer member to be separated from the cabinet member, simplifying mounting, removal, and reinstallation during fitting or service.
The Knape and Vogt 8400B EB 22 slide is a side mount ball bearing drawer slide suited to cabinet projects that need full extension from a 22 inch length. In typical kitchen, bath, or shop cabinetry using side-mounted hardware, the 1/2 inch plus 1/32 inch minus 0 inch side clearance per side directs the drawer box width, allowing the slide to run freely along its full travel. Installers working with 32 mm system casework can use the 32 mm pattern to align the cabinet members with existing line-bored holes, which speeds up production and supports repeatable positioning across multiple cabinets in a job. The 1-13/16 inch height allows the slide to be used on many standard drawer side heights without crowding, helping maintain enough material for fastener bite. The ebony black finish fits dark interiors where visible hardware is expected to be low contrast.
The non-handed design means the same slide can be used on either the left or right side, which simplifies inventory and reduces sorting time during installation runs. Full extension travel provides consistent access to the entire drawer box, making it easier to verify clearances at the back of the slide and to fit inserts or dividers. The hold-in anti-rebound function helps drawers remain closed once pushed in, which is useful for maintaining alignment of drawer fronts in banks of drawers. A ball bearing mechanism supports smooth movement along the length of the slide, aiding in precise front-gap adjustment since the drawer moves predictably when fine-tuning overlays. The lever disconnect lets installers remove the drawer after initial mounting, which is helpful for transporting cabinets, finishing interiors, or making adjustments without working around an installed box.
The 8400B EB 22 is a Knape and Vogt 8400 Series side mount ball bearing drawer slide, providing full extension travel for drawers in cabinet applications.
The 8400B EB 22 requires 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, guiding the drawer box width for proper sliding action.
The KV 8400 22 inch slide has a height of 1-13/16 inch, defining the minimum vertical space needed on the drawer and cabinet sides for mounting.
The 8400B EB 22 lever disconnect allows the drawer member to separate from the cabinet member, simplifying drawer removal for fitting, finishing, or service work.
The 8400B EB 22 is recommended to be mounted with #7 x 1/2 inch Phillips truss head fasteners, matching the slide hole design for secure attachment.
The 8400B EB 22 uses an ebony black finish, giving the slide a dark appearance that coordinates with dark cabinet interiors.
The 22 inch full extension Knape and Vogt 8400B EB 22 side mount slide pairs a defined 1/2 inch plus 1/32 inch minus 0 inch side clearance with a 1-13/16 inch height, giving clear sizing targets for drawer construction. With ball bearing movement, lever disconnect, a ball retainer latch, and a non-handed layout, the slide supports efficient installation and consistent operation in system-based or custom cabinetry. The ebony black finish and 32 mm pattern align with modern cabinet interiors and drilling practices, making this model a practical choice when specifying hardware for drawers requiring full extension travel.
Sold In: 10 Set
