Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8400 drawer slide is a 10 inch full extension, side mount, ball bearing drawer slide designed for smooth travel over the full drawer length. The full extension design lets the drawer open to its 10 inch length, which exposes the entire drawer interior for access and hardware adjustments. This slide is part of the 8400 Series, so it follows a consistent design approach suited to repeat use across matching drawer banks. The slide uses ball bearings, which support the moving members along a defined track, helping maintain alignment under load during repeated openings. The white finish covers the slide members, giving a clean look that can match light-colored casework or coordinated hardware layouts. This model is unhanded, so the same member profile can be used on either side of the drawer, which simplifies layout and ordering for production or field replacement.
This Knape and Vogt 8400 Series slide is a side mount design, so it mounts directly to the cabinet side panels and drawer sides for a straightforward layout. The slide is specified for side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, which defines the drawer box width relative to the cabinet opening for proper fit. The slide height is 1-13/16 inch, giving a known profile size when coordinating with drawer side heights or stacked slide layouts. The recommended fasteners are #7 x 1/2 inch Phillips Truss Head (BST1/2X7-2C), which provides a specific shank and head style suited to the slide holes and typical cabinet materials. Together, these dimensions and fastener details support predictable mounting and consistent drawer operation across production runs.
This KV Model #8400 slide with 10 inch length works in drawer applications designed around that nominal depth, so the full extension travel matches the planned cabinet geometry. The 1/2 inch plus 1/32 inch minus 0 inch side clearance per side aligns with common side mount drawer layouts, giving a clear target width for building or modifying drawer boxes. The 1-13/16 inch slide height keeps the profile compact enough for many cabinet side heights while still leaving space above or below for other hardware in multi-drawer stacks. The 32 mm pattern integrates with system-drilled cabinet sides that use that pattern, supporting efficient production drilling and hardware positioning. The white finish presents a neutral, light appearance, which suits white or light-toned casework where exposed hardware may be visible when drawers are open.
The full extension design of this 8400B WH 10 drawer slide allows the moving member to travel out to expose the full 10 inch drawer depth, which simplifies access to stored items and adjustments at the back of the drawer. The ball bearing construction guides the drawer smoothly along the slide members, which supports consistent movement when the drawer is loaded within the design range. The hold-in anti-rebound feature adds resistance in the closed position, helping the drawer remain seated against the cabinet front under normal conditions. The lever disconnect lets installers separate the drawer member from the cabinet member during setup, which can simplify handling in tight cabinet interiors and streamline fitting work. The ball retainer latch keeps the bearings in their intended track as the slide cycles, which supports long-term alignment. Because the slide is non-handed, the same part can be used on both sides, helping maintain consistent performance and simplifying replacement planning.
The 8400B WH 10 is a Knape and Vogt 8400 Series, 10 inch, full extension, side mount, ball bearing drawer slide, so it supports full-depth drawer travel on side-mounted hardware.
The hold-in anti-rebound feature on this slide helps keep the drawer in the closed position once pushed shut, which reduces the chance of the drawer creeping open in everyday cabinet use.
This drawer slide is specified for 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, which sets the drawer box width relative to the cabinet opening for proper slide action.
The KV 8400 10 inch slide has a height of 1-13/16 inch, which helps installers coordinate slide placement with drawer side heights and vertical spacing between multiple drawers.
This 8400 Series slide is non-handed, so the same slide configuration can be used on either the left or right side, simplifying installation and replacement stock.
The recommended fasteners are #7 x 1/2 inch Phillips Truss Head (BST1/2X7-2C), providing a head and shank combination suited to the slide hole pattern and typical cabinet materials.
The 8400B WH 10 drawer slide combines 10 inch full extension travel, side mount installation, and ball bearing construction for precise movement in drawer projects. The defined 1/2 inch plus 1/32 inch minus 0 inch side clearance and 1-13/16 inch height give clear layout targets during cabinet and drawer construction. Features such as the hold-in anti-rebound action, lever disconnect, ball retainer latch, and non-handed design support efficient installation and consistent operation. When a white finish and 32 mm pattern are part of the cabinet plan, this Knape and Vogt 8400 Series slide offers a coordinated option for building or updating drawer runs.
Sold In: 10 Set
