Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8400 drawer slides in the 8 inch length give you a full extension travel, so the drawer can be pulled completely out to expose the full storage area, which helps during cabinet installs, adjustments, and service work. The side mount design places these slides directly on the cabinet sides, keeping the hardware accessible during installation and later alignment work. A specified side clearance of 1/2 inch plus 1/32 inch and minus 0 inch on each side sets a clear cabinet-to-drawer sizing target, which supports consistent fits across a production run. A slide height of 1-13/16 inch defines how much vertical space is needed in the cabinet, which matters when you are stacking multiple drawers in a tight case. The ebony black finish keeps the hardware dark and uniform, which helps when matching darker interiors or open-shelf cabinet designs.
The 8400B EB 8 model is a side mount drawer slide, so it relies on direct attachment to the cabinet sides, which gives a familiar layout for installers used to traditional side-mounted hardware. The specified side clearance of 1/2 inch plus 1/32 inch and minus 0 inch on each side defines the drawer box width relative to the cabinet opening, which supports accurate cutting of parts and reduces time spent fine-tuning fits. The 32 mm pattern on the slide works with line-boring setups, which lets production shops drill mounting holes in one pass and then fasten slides without individual layout. Recommended fasteners are #7 x 1/2 inch Phillips Truss Head (BST1/2X7-2C), so installers know the shank size and head style that match the slide holes, which helps achieve secure attachment in common cabinet materials.
The KV Model #8400 8 inch length slides are side mount drawer slides, so they are suited to cabinets built with side panels that accept this mounting style, which is common in many shop-built and modular cabinet systems. A side clearance requirement of 1/2 inch plus 1/32 inch and minus 0 inch on each side sets the drawer box width for a given opening, which helps designers and builders size parts accurately for smooth operation. The slide height of 1-13/16 inch defines the minimum vertical space the hardware will occupy along the drawer side, which matters when stacking shallow drawers or fitting a top drawer above structural rails. The ebony black finish supports use in darker casework where visible hardware should remain low profile, which can be important in retail fixtures or residential projects with dark interiors.
The lever disconnect feature on the 8400 Series slides allows the drawer member to be separated from the cabinet member, which speeds up assembly because drawers can be mounted, removed, and reinstalled without removing the entire slide set. A ball retainer latch is part of the slide design, which holds the ball bearings in position and helps maintain smooth travel over time in regular cabinet use. The non-handed construction means the same slide works on either the left or right side, which simplifies parts stocking and reduces sorting errors during fast-paced installation. Being part of the 8400 Series gives installers a consistent design language across lengths, which is useful when projects mix different drawer depths but rely on similar performance. Bulk Pack options at 10 pairs per box without screws align with production environments, which can help shops plan counts and pull stock for runs of multiple cabinets.
The 8400B EB 8 is a Knape and Vogt side mount ball bearing drawer slide, so it mounts to cabinet sides and provides smooth guided motion for 8 inch drawers.
The 8 inch 8400 Series slides are full extension, so the drawer travels out approximately its full slide length, which exposes the full depth for access and adjustments.
The 8400B EB 8 slides use a side clearance of 1/2 inch plus 1/32 inch and minus 0 inch on each side, which guides drawer box sizing for a given cabinet opening.
The Knape and Vogt 8400 Series slides have a height of 1-13/16 inch, which affects how closely drawers can be stacked vertically inside a cabinet.
The 8400 Series slides feature a lever disconnect, which allows the drawer and cabinet members to be separated for installation, adjustments, or drawer removal.
The recommended fasteners are #7 x 1/2 inch Phillips Truss Head (BST1/2X7-2C), which match the slide hole pattern for secure mounting to typical cabinet materials.
The 8 inch full extension 8400B EB 8 slides from Knape and Vogt combine side mount installation, defined side clearance, and a 1-13/16 inch height, which helps cabinet builders design drawer boxes and openings that work together. The ebony black finish and 32 mm pattern support both aesthetic projects and line-bored production work, keeping layout consistent. With lever disconnect, a ball retainer latch, and non-handed construction, these slides fit into shop and jobsite workflows that value quick assembly and straightforward servicing. Choose this 8400 Series model when an 8 inch, full extension, ebony black side mount slide matches your cabinet design and drilling system.
Sold In: 10 Set
