
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 8400 drawer slide is an 8 inch full extension, ball bearing, side mount slide that lets the drawer travel its full length so stored items remain accessible across the entire drawer depth. The side mount design positions the slide on the drawer sides, supporting straightforward layout in common cabinet constructions. A hold-in anti-rebound feature resists the drawer moving back out after closure, which supports consistent shut positioning in everyday use. The ball bearing construction supports smooth sliding movement along the travel path. An unhanded configuration allows the same slide design to work on either side of the drawer, simplifying part selection and layout. The white finish visually matches white casework components where a coordinated hardware appearance is desired. This model is part of the Knape and Vogt 8400 Series, so it aligns with that established product family for repeatable specification across similar projects.
This Knape and Vogt 8400 Series slide is specified as a side mount design, so the installer aligns each member to the drawer and cabinet sides during assembly. The side clearance is 1/2 inch plus 1/32 inch minus 0 inch on each side, which defines the target gap between drawer and case side for smooth travel. A slide height of 1-13/16 inch sets how much vertical space the hardware occupies on the drawer side, guiding drawer box height and notch choices. The 32 mm pattern designation indicates the slide suits layouts based on a 32 mm system, which relates to hole spacing in cabinetry built around that standard. Recommended fasteners are #7 x 1/2 inch Phillips Truss Head screws (BST1/2X7-2C), which helps match screw size and head style to the slide holes during installation.
The KV Model 8400 8 inch length slide is suited to drawers built around an 8 inch slide travel, aligning with shallow drawers or small compartments where shorter members are appropriate. Because the slide height is 1-13/16 inch, it positions well on drawer sides with enough vertical surface to support that profile. The side clearance requirement of 1/2 inch plus 1/32 inch minus 0 inch on each side ties directly into case and drawer sizing, guiding cabinet builders to dimension drawer widths for predictable sliding action. The 32 mm pattern detail means the slide relates to cabinet constructions using 32 mm hole spacing, which supports layout in systems-based cabinetry where hardware location follows that grid. The white finish aligns visually with white or light interior casework, matching hardware color to cabinet interiors where the slide may be visible when the drawer is open in normal use.
The unhanded design of this Knape and Vogt 8400 Series slide means the same product can be mounted on either the left or right side, simplifying inventory and reducing the chance of pulling a wrong-hand part during assembly. The full extension function defines exactly how far the drawer will project, allowing consistent planning of drawer overtravel relative to the cabinet face across multiple openings. The side mount configuration keeps mounting points along the side of the drawer and cabinet, which supports repeatable jig-based installation in a shop setting. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch each side provides a clear dimension for sizing, so drawers can be cut and assembled to a single-width standard on a run of cabinets. The lever disconnect feature allows the drawer member to release from the cabinet member, which helps during installation and alignment when drawer boxes are fitted to the mounted cabinet members. A ball retainer latch is part of the slide design, helping keep the ball bearings properly located in the raceway, which matters for consistent slide engagement over repeated openings.
The 8400B WH 8 is a Knape and Vogt Model 8400 Series 8 inch full extension, ball bearing, side mount drawer slide, so it supports full travel with side-mounted installation.
The Knape and Vogt 8400B WH 8 slide has a side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, which defines drawer width relative to the cabinet opening.
The Knape and Vogt 8400B WH 8 slide height is 1-13/16 inch, which guides how much vertical space is needed on the drawer side for mounting the slide members.
The 8400B WH 8 is specified as a full extension slide, so the drawer can travel out to its rated 8 inch length for access to the full drawer interior depth.
The Knape and Vogt 8400 Series hold-in anti-rebound feature helps the drawer stay closed after being pushed in, which supports consistent closed positioning in regular operation.
The 8400B WH 8 uses recommended fasteners of #7 x 1/2 inch Phillips Truss Head screws (BST1/2X7-2C), matching screw size and head style to the slide hole design.
The Knape and Vogt 8400B WH 8 slide combines an 8 inch full extension length, 1-13/16 inch height, and side mount layout, giving cabinet builders defined dimensions for shallow drawers. The specified 1/2 inch plus 1/32 inch minus 0 inch side clearance each side supports consistent drawer width decisions across a job. With full extension, a hold-in anti-rebound feature, lever disconnect, ball bearing construction, and unhanded design, this 8400 Series slide offers a clear, repeatable hardware choice for drawers built around 8 inch travel in white interior cabinetry.
Sold In: 10 Set