Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8400 drawer slides in the 28 inch length provide full extension travel, so drawers open the entire slide length and expose the storage space for easier access during everyday use or shop work. The side mount design positions the slides on the drawer sides, supporting typical cabinet construction in woodworking and casework projects. Ebony black finish gives a dark appearance, which blends with dark cabinetry and creates a consistent look in visible slide installations. The slides use ball bearing construction, allowing the drawer members to move smoothly along the cabinet members to support repeatable opening and closing under load. A hold-in anti-rebound function keeps the drawer pulled in at the rear position, helping the drawer stay closed until it is intentionally opened. This 8400 Series model is unhanded, so the same slide configuration works on both left and right sides and simplifies inventory and layout.
This KV 8400B EB 28 side mount slide specifies 1/2 inch side clearance with a tolerance of plus 1/32 inch and minus 0 inch on each side, so drawer width can be set accurately relative to the cabinet opening. The 1-13/16 inch slide height defines the vertical footprint along the drawer side and assists with checking clearances to adjacent elements. A ball retainer latch helps keep the ball bearings properly positioned inside the slide members during motion, supporting consistent action over time. The non-handed design lets installers use the same part on either side of the drawer, which simplifies stocking and reduces part mix-ups. Recommended fasteners are #7 x 1/2 inch Phillips truss head, tying the slide performance to fasteners chosen for typical cabinet-grade materials.
The 28 inch full extension design suits drawers or pull-outs built around that travel, so the drawer box depth can match the slide length for predictable action at full extension. Side mounting aligns with common cabinet construction, where the slide members attach along the interior cabinet sides and drawer sides, making it practical for casework, shop cabinets, and similar installations. The ebony black finish supports applications where the hardware may be visible when drawers are open, such as darker stained or painted cabinetry, because the dark slide surface visually recedes. The 32 mm pattern integrates with cabinets drilled on 32 mm centers, letting installers tie the slide locations to existing line-bore holes and maintain consistent spacing across a run of cabinets.
The hold-in anti-rebound feature keeps the drawer positioned fully in the closed location by resisting minor outward movement, which helps drawers stay shut during normal use and reduces nuisance openings. Ball bearing construction lets the drawer glide along hardened tracks, making it easier to open heavier drawers within the slide rating and maintain predictable feel over many cycles. Lever disconnect separates the drawer member from the cabinet member when needed, so installers can remove the drawer box during finishing, adjustment, or service without disturbing slide locations. The non-handed configuration reduces layout errors, since there is no left- or right-specific part to track, which speeds installation in multi-drawer projects. Specified side clearance of 1/2 inch plus or minus 1/32 inch each side converts directly into a target drawer width, supporting consistent fitting and reducing rework related to binding or excessive play.
The KV 8400B EB 28 is a Knape and Vogt 28 inch full extension, side mount, ball bearing drawer slide, so it supports drawers that need full travel and smooth movement along cabinet sides.
The KV 8400B EB 28 requires 1/2 inch side clearance plus 1/32 inch and minus 0 inch on each side, which determines the drawer box width relative to the cabinet opening.
The KV 8400B EB 28 has a height of 1-13/16 inch, so installers can plan vertical space along the drawer sides and avoid interference with cabinet structure.
The KV 8400B EB 28 lever disconnect lets the drawer member separate from the cabinet member, which makes it easier to remove or reinstall drawers during fitting or finishing.
The KV 8400B EB 28 specifies #7 x 1/2 inch Phillips truss head fasteners, giving a suitable head style and length for typical cabinet materials and slide holes.
The KV 8400B EB 28 non-handed design means the same slide model installs on either drawer side, simplifying inventory and reducing left-right part confusion.
Knape and Vogt 8400 drawer slides in the 28 inch ebony black version combine full extension travel, side mount installation, and ball bearing action for drawers built around 1/2 inch side clearance each side. With a defined 1-13/16 inch height, a 32 mm pattern, lever disconnect, and a hold-in anti-rebound feature, these slides provide clear dimensional targets and handling characteristics for cabinetry or casework. For projects that match the 28 inch full extension length and side mount layout, this 8400B EB 28 model from Wurth Baer Supply offers a specific, repeatable slide configuration to build around.
Sold In: 10 Set
