Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 1805 drawer slide describes this left hand 18 inch side mount slide that supports straightforward drawer movement where a Euro style profile is preferred. The slide uses a self-closing design that pulls the drawer shut at the end of travel, which helps drawers stay closed in everyday cabinet use. A 3/4 extension action moves the drawer out far enough for access while keeping part of the slide engaged, which supports smooth guidance under normal loads. The slide height of 35.5 mm keeps the profile compact, which helps when fitting into tighter cabinet clearances. A white epoxy coated finish covers the slide, which provides a neutral appearance inside light-colored casework. The product is identified as model 1805 Series with manufacturer part number 1805-97 WH 450, which helps match this left hand cabinet member to existing Knape and Vogt Euro slide layouts.
This 1805 Series part is a side mount drawer slide, which positions the member against the cabinet sidewall and the drawer side for a familiar mounting workflow. The recommended fasteners are #6 x 5/8 inch Phillips pan head screws, which define shank and head style for planning pilot sizes and ensuring heads seat properly in the slide holes. The stated side clearance of 1/2 inch plus 1/32 inch minus 0 inch each side ties directly to cabinet opening and drawer width, which supports repeatable fit across multiple drawers in a run. The 32 mm pattern helps align screws in frameless cabinets using system rows, which can keep installation consistent from drawer to drawer.
This Knape and Vogt 18 inch 1805 Series component is a left hand side mount Euro slide, which positions it for applications using mating right hand and drawer members from the same series. The 3/4 extension travel works well where typical cabinet drawers need good access without full-extension hardware, which can be suitable for many base and utility drawers built around 18 inch slide lengths. The white epoxy coated finish aligns visually with white or light interior cabinetry, which helps the hardware blend into the case rather than standing out when drawers are open. A slide height of 35.5 mm keeps the profile modest, which is useful when drawer side heights are limited or when multiple slide levels are stacked in a case. The left hand cabinet member identity also helps maintain handedness in production, which supports consistent assembly when paired with the correct right hand and drawer members.
The side clearance specification of 1/2 inch plus 1/32 inch minus 0 inch each side provides a defined tolerance window, which lets builders size drawer boxes with confidence that the 1805 Series slide will run freely without excessive play. The 32 mm pattern on the slide interfaces directly with system holes in frameless cabinetry, which helps keep mounting positions consistent across a bank of drawers and reduces layout time on repetitive work. The self-closing design acts at the back of travel, which pulls the drawer front into its seated position and supports uniform front alignment along a run of cabinets. The positive double-out stop functions as a safety for the mechanism, which reduces the chance of accidental over-extension that could disturb alignment. The lift out disconnect allows the drawer to be removed from the cabinet member, which helps during finishing, adjustments, or service when direct access to the interior is required.
The 1805-97 WH 450 is a Knape and Vogt 1805 Series left hand side mount Euro drawer slide with 3/4 extension, which suits standard cabinet drawer applications using that slide style.
The self-closing design on the 1805 Series slide pulls the drawer shut near the end of travel, which helps keep drawer fronts seated and aligned during everyday operation.
The 1805 Series slide specifies 1/2 inch plus 1/32 inch minus 0 inch side clearance each side, which guides drawer and cabinet sizing so the drawer operates smoothly.
The 1805 Series slide uses a 32 mm pattern, which works with standard 32 mm cabinet drilling systems to simplify layout in frameless cabinet construction.
The 1805 Series slide is white epoxy coated, which provides a light-colored finish that visually suits white or light-toned cabinet interiors.
The 1805 Series slide is specified for #6 x 5/8 inch Phillips pan head screws, which define screw size and head style for mounting into cabinet and drawer sides.
This Knape and Vogt 18 inch 1805 Series left hand side mount slide combines a self-closing design, 3/4 extension travel, and a white epoxy coated finish, which together support clean drawer action and appearance in Euro-style cabinetry. With a defined side clearance of 1/2 inch plus 1/32 inch minus 0 inch each side and a 32 mm pattern, the slide aligns with common cabinet construction methods, which helps streamline sizing and drilling. When a project is built around 18 inch 1805 Series Euro slides, this 1805-97 WH 450 component serves as the specified left side member in that system.
Sold In: 100 Each
