Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand drawer member from Knape and Vogt's 1805 series — a 12 inch, white epoxy-coated, self-closing roller slide component that mounts to the bottom edge of the drawer side and rides inside the matching 1805 cabinet member. It is a single handed member, not a complete slide, and it is sized for shallow-drawer applications such as spice pullouts, pencil drawers, and upper cabinet organizers.
The 12 inch length targets the shallow end of the drawer spectrum. Spice pullouts, pencil drawers, message-center organizers, and small upper-cabinet drawers are the natural home for this member. At 3/4 extension the back section of the drawer stays inside the cabinet, which is a reasonable trade-off for short drawers where the contents are close to the front anyway. Side clearance is 1/2 inch per side, so build the drawer box 1 inch narrower than the inside cabinet opening — the standard Euro-slide formula.
The white epoxy powder-coat is a color choice first and a protective coating second. It does its best work in white melamine frameless cabinets and painted face-frame boxes where a zinc-finish slide would stand out against the interior. The finish matches the white epoxy used throughout the 1805 series, so mixing this member with same-series cabinet members keeps the look consistent. Epoxy coating is an interior finish — this is an indoor slide for dry cabinet environments.
Cabinet shops running high-volume production on white-interior boxes buy 1805 members at the Q-Pack level so they can mix and match hands and lengths without overbuying. A right-hand drawer member at 12 inches covers one specific drawer position; the shop pulls the left-hand mate and the two cabinet members from the same series to complete the set. Replacement work is the other common use: if a drawer member on an existing 1805 installation is damaged, ordering a matched right-hand replacement is faster and cheaper than replacing the whole slide. The 75 lb load rating covers virtually every standard light-duty drawer application in this size range.
No. This is the right-hand drawer member only. To run one drawer you also need one left-hand drawer member and both the left- and right-hand cabinet members from the same 1805 series.
The 1805 series uses a self-closing ramp — a mechanical feature that pulls the drawer fully shut once it enters the capture zone. It is a positive close, not a damped one. Soft-close uses a hydraulic damper to slow the drawer to a silent landing; that is a different product.
This is a 3/4-extension slide, so the drawer opens roughly three-quarters of the slide length. The rear section of the drawer stays inside the cabinet at full open — full rear access is not a feature of this member.
Yes, but a face-frame installation requires rear mounting sockets or brackets to support the back of the slide — those are sold separately and must be specified for the 1805 series. Frameless cabinets mount directly to the panel.
No. The 1805 drawer member is engineered to pair with 1805 cabinet members. Members from other series or other brands are not interchangeable.
Matching the correct hand, length, and series at the ordering stage keeps the project moving — this right-hand 12 inch 1805 drawer member covers shallow white-interior drawers where a clean finish and a reliable self-close are the two things that matter most.
Sold In: 100 Each
