Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 1805 drawer slides in the 20 inch length provide a 3/4 extension action, so the drawer opens far enough for access while keeping part of the slide engaged for support. The side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch on each side sets a clear planning dimension for sizing cabinet openings and drawer boxes. The slide height of 35.5 mm keeps the profile compact, which helps when working in tight cabinet spaces. A 32 mm pattern is present, aligning with common European cabinet drilling layouts and speeding layout work in shops already set up on that system. The white epoxy coated finish establishes a consistent appearance in light interiors. This right hand cabinet member is part of a side mount drawer slide system in the Model 1805 Series.
This 1805-98 WH 500 right hand cabinet member is designed as a side mount drawer slide part, so it registers off the cabinet side for alignment. The specified side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch on each side gives a fixed gap target between drawer and cabinet, which supports smooth running without binding. A 32 mm pattern is present, which ties into standard system holes on many European frameless cabinet layouts and can shorten layout time when drilling. The recommended fasteners are #6 x 5/8 inch Phillips pan head screws, providing a clear screw size and head style for anchoring the slide to cabinet members built from typical sheet goods.
The SAP description identifies this part as a 20 inch RH CAB MBR in the 1805 Series, so it serves as the right hand cabinet member in a side mount euro slide assembly at that length. The side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch on each side defines the space around the drawer box that this system is intended to occupy in a cabinet opening. With a 35.5 mm overall height, the slide remains relatively low on the cabinet side, which helps when routing utilities or shelves above and below. The presence of a 32 mm pattern means the slide can align with pre-drilled vertical hole rows typical of European cabinet construction, tying this component to frameless cabinet runs that already follow that drilling standard.
The 3/4 extension action on this Model 1805 Series member means the drawer will project about three-quarters of its length from the cabinet, so a portion of the slide remains engaged for guidance while still allowing reach into the back area. That balance helps when the drawer holds moderate loads but does not require full-extension access. The self-closing design engages near the end of travel to pull the drawer into the closed position, which can support consistent front alignment across a run of cabinets. A positive double-out stop limits how far the moving member travels, helping protect the parts during repeated use in busy shop or residential environments. The lift out disconnect allows the drawer member to separate from the cabinet member, which can simplify finishing, adjustments, or changes to drawer fronts without working around an attached box inside the cabinet.
The 1805-98 WH 500 is a Knape and Vogt Model 1805 Series right hand cabinet member for a side mount drawer slide system, so it works as one half of a side-mounted euro slide assembly.
This Knape and Vogt 1805 drawer slide component is specified as 3/4 extension, so the assembled slide lets the drawer open about three-quarters of its length for access while keeping part of the slide engaged.
This euro slide uses a side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch on each side, setting the gap between drawer box and cabinet for smooth running and proper alignment.
The 1805-98 WH 500 has a 32 mm pattern, which aligns with standard European cabinet system holes and can suit frameless cabinet constructions using that drilling layout.
The recommended fasteners are #6 x 5/8 inch Phillips pan head screws, so the slide is intended to be anchored with that screw size and head style to cabinet materials.
This right hand cabinet member is white epoxy coated, giving the 1805 Series slide a white finish that matches light-colored cabinet interiors using epoxy coated euro slides.
The Knape and Vogt 1805-98 WH 500 right hand cabinet member combines a 20 inch length, 3/4 extension travel, and a self-closing design, which suits drawers that benefit from guided closure and moderate access. Its specified side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch on each side and 35.5 mm height define clear dimensional targets when planning cabinet openings. With a 32 mm pattern and recommended #6 x 5/8 inch Phillips pan head screws, this white epoxy coated euro slide component aligns with system drilling and typical shop fastening methods, ready to be ordered for projects built around the 1805 Series layout.
Sold In: 100 Each
