Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand drawer member from Knape and Vogt's 1805 series — a 14 inch (350mm nominal), white epoxy-coated, self-closing Euro slide component sold as a single handed piece. It attaches to the bottom edge of the drawer side and rides inside the matching 1805 cabinet member, forming one side of a working drawer installation when paired correctly.
The 14 inch length suits shallower cabinet bays — spice drawers, narrow vanity banks, and smaller closet pulls where a longer slide would overhang the back of the box. The 1805 series is cataloged in metric nominal lengths from 300mm to 600mm, and this member is the 350mm size. Build the drawer box to leave 1/2 inch of side clearance per side, which means the box runs 1 inch narrower than the inside cabinet width. Knape and Vogt recommends a maximum drawer width of 18 inches for the series, so this member is well within that range on any standard shallow drawer application.
White epoxy is a finish choice, not a structural upgrade — its job is to disappear. In white melamine frameless cabinets and painted face-frame boxes, a white-finished slide member reads as part of the interior rather than an exposed piece of hardware. That matters in vanity and closet work where the drawer is at eye level when open, and in kitchen installs where a homeowner notices every detail. The steel members under the coating provide the load path; the epoxy handles the visual.
Cabinet shops running 1805 slides in volume buy members separately so a single damaged piece on the job can be replaced without pulling a full set. Refacers and installers working in white kitchens stock left- and right-hand drawer members to match the slide program already in the boxes. The Q-Pack format suits either scenario: it is not retail packaging, and it is not a loose bulk carton — it is a shop-ready boxed quantity for production throughput.
One drawer needs a left-hand and a right-hand drawer member, plus a matching left-hand and right-hand cabinet member — all from the 1805 series in the same length. Two left-hand members will not form a working pair. If the cabinet member is already in place, you only need the matching drawer members.
No. The 1805 self-closing ramp pulls the drawer shut with a positive, undamped close once it enters the capture zone. Soft-close uses a damper to slow and cushion the last inch of travel. This member does not have a damper.
No. The 1805 drawer member is engineered for the 1805 cabinet member. Members from other series or brands are not interchangeable and will not seat or track correctly.
At 3/4 extension, the drawer opens to roughly three-quarters of the slide length. The rear few inches of the box stay inside the cabinet at full open — this is standard for Euro roller slides and is not a defect.
Ordering by the member means no wasted hardware and no waiting on a full set when only one side needs replacing. Match the 14 inch left-hand drawer member to your 1805 cabinet members and add the quantity your run requires.
Sold In: 100 Each
