Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 1805 drawer slide in model 1805-99 WH 400 is a 16 inch left hand cabinet member from the 1805 Series, so it matches the sizing and geometry installers use with this specific euro slide family. This part is a side mount drawer slide component in the Side Mount Drawer Slides class, so it works where a cabinet member mounts to the cabinet side instead of under the drawer. The slide is a 3/4 extension design, which lets the drawer open roughly three-quarters of its length and keeps some support inside the cabinet for stability under everyday loads. A self-closing design in this slide pulls the drawer shut in the last part of travel, which helps drawers return to a consistent closed position during normal use. The white finish is an epoxy coated surface, so the slide matches white interiors while using a coated steel track for smooth movement.
This Knape and Vogt 1805 Series left hand cabinet member is built for side mount installation, so it sits directly on the cabinet side panel where the drawer will travel. The slide uses the 32 mm pattern, so the mounting holes align with cabinets drilled on that system and speed layout where rows of system holes already exist. Side clearance is specified at 1/2 inch plus or minus 1/32 inch on each side, so cabinet openings and drawer box widths can be set to achieve a predictable slide fit. The recommended fasteners are #6 x 5/8 inch Phillips pan head screws, which gives installers a known screw size and head style that seats properly in the mounting holes. Height of 35.5 mm keeps the slide low enough to fit standard drawer side heights while still giving enough web for solid screw placement along the cabinet member.
This 16 inch 3/4 extension euro slide cabinet member is sized for drawers designed around a 16 inch slide length, so it fits well in small to mid-depth cabinet drawers where full extension is not required. As a left hand cabinet member of the 1805 Series, it is intended for the left side of the cabinet opening, so it works together with a matching right hand cabinet member and drawer members to complete the slide assembly. The 1/2 inch plus or minus 1/32 inch side clearance on each side sets the gap between the drawer box and cabinet side, so builds that follow this clearance will position the drawer correctly on the slides. With a height of 35.5 mm and a 32 mm pattern, this member aligns with system-drilled cabinets that follow 32 mm spacing, so holes in cabinet sides can be used directly rather than laid out individually.
The self-closing design of the 1805 Series cabinet member means the slide provides closing force near the end of travel, so drawers are drawn into a consistent rest position and do not remain partially open after use. A positive double-out stop in this slide controls the maximum opening point, so the drawer cannot be accidentally pulled past its intended 3/4 extension and the slide components remain engaged under load. The lift out disconnect feature lets the drawer member be separated from this cabinet member, so installers can remove a drawer to adjust fronts, square boxes, or perform service and then place it back into the same track. The white epoxy coated finish on this cabinet member provides a coated running surface, so metal contact is on a finished track while also presenting a clean white appearance that matches white case interiors. As part of the 1805 Series with a defined manufacturer part number 1805-99 WH 400, this member aligns with other marked 1805 components, so replacements and matching parts can be identified by series and part number for ongoing work.
The 1805-99 WH 400 is a Knape and Vogt 1805 Series side mount drawer slide cabinet member, so it serves as the left side track in a euro style slide system.
This slide is a 3/4 extension design, so the drawer travels to about three-quarters of its length while keeping some slide engagement inside the cabinet for support.
The 1805 Series specifies side clearance of 1/2 inch plus or minus 1/32 inch on each side, so cabinet openings and drawer widths can be sized to that gap for proper running fit.
This cabinet member uses recommended fasteners of #6 x 5/8 inch Phillips pan head screws, so screw selection and driver choice can match that specification.
The slide uses a 32 mm pattern, so its mounting holes line up with cabinets drilled on the 32 mm system and help speed up installation in system cabinets.
The self-closing design pulls the drawer shut near the end of travel, so drawers settle into the closed position more consistently during everyday opening and closing.
The Knape and Vogt 16 inch 3/4 extension 1805 Series left hand cabinet member in white suits projects that already use euro style side mount geometry and the 32 mm pattern. With its defined 1/2 inch plus or minus 1/32 inch side clearance and 35.5 mm height, it aligns well with cabinet cases and drawer boxes planned around those dimensions. The self-closing design, positive double-out stop, and lift out disconnect give this member functional advantages for everyday drawer use and service. When a project calls for a white epoxy coated side mount slide in the 1805 Series, this 1805-99 WH 400 part number provides a clear match so slide components can be specified and repeated across similar cabinets.
Sold In: 100 Each
