Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 12 inch drawer slides in the 1805 Series give you a 3/4 extension self-close epoxy coated euro slide for side mount applications. The 12 inch length sets the drawer travel for shallow or mid-depth cabinet drawers where full extension is not required, helping match motion to the cabinet depth. The self-closing design pulls the drawer shut at the end of travel, which reduces partially open drawers in busy shops and keeps faces aligned in day-to-day use. Epoxy coated members provide a smooth running surface, supporting repeatable drawer action across the life of the cabinet. This component is the left hand drawer member 1805-97 WH 300, so it fits specifically on the drawer side in euro-style constructions that use separate cabinet and drawer members. The white finish lets the slide blend with light-colored cabinet interiors commonly used in residential and commercial projects.
This 1805 Series side mount drawer member runs on a side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch on each side, so case and drawer widths can be laid out to that clearance during box construction. The slide height of 35.5 mm defines how much vertical space the member occupies, which is useful when stacking drawers or working around fixed shelves. A 32 mm pattern is provided, aligning the member with system-bore cabinet layouts that follow 32 mm line boring practices. Recommended fasteners are #6 x 5/8 inch Phillips pan head, giving a known screw size and head profile that matches the slide slots and holes for secure mounting.
This Knape and Vogt left hand drawer member 1805-97 WH 300 is part of the 1805 Series side mount drawer slides, so it works in euro-style cabinet drawer assemblies that use matching cabinet and drawer members. The member installs on the left side of the drawer, with a corresponding left hand cabinet member supporting the overall slide system. Side clearance of 1/2 inch plus, 1/32 inch minus, 0 inch per side means the combined drawer width and case opening are sized for that gap, allowing the slide to run without binding when loaded. The 12 inch length pairs with cabinets where the interior depth is near that dimension, helping avoid lost space at the back while keeping the drawer box proportioned to typical kitchen, bath, or utility layouts.
The 32 mm pattern on this self close epoxy coated euro slide ties directly into system-bore drilling, so rows of drawers can be located off the same reference line, improving consistency across a bank of cabinets. The specified slide height of 35.5 mm gives a fixed dimension when planning drawer box side heights and clearances above runners. Using #6 x 5/8 inch Phillips pan head fasteners matches the recommended screw size to the slide holes, so the head seats properly for full bearing against the steel. The positive double-out stop is built into the design, which limits over-travel and helps protect both the slide and the cabinet sides under repeated opening cycles. The self-closing action built into the 1805 Series further stabilizes drawer position after closing, which supports even reveals and alignment in multi-drawer installations.
The Knape and Vogt 1805-97 WH 300 is a 12 inch 1805 Series self-close epoxy coated euro side mount drawer slide member, giving 3/4 extension travel for drawer applications.
The Knape and Vogt 1805-97 WH 300 is a left hand drawer member, so it mounts on the left side of the drawer in a matching 1805 Series slide system.
The 1805 Series drawer member is designed for 1/2 inch plus, 1/32 inch minus, 0 inch side clearance on each side, guiding case and drawer width layout.
The Knape and Vogt 1805-97 WH 300 provides 3/4 extension, so the drawer opens partway while maintaining support inside the cabinet during use.
The 1805 Series member uses a 32 mm pattern, which aligns with system-bore cabinet construction and supports consistent hole spacing across installations.
The 1805-97 WH 300 is recommended for use with #6 x 5/8 inch Phillips pan head fasteners, matching the slide holes and slots for secure attachment.
The Knape and Vogt 12 inch drawer slides 1805-97 WH 300 combine a 3/4 extension self-closing design, 1/2 inch side clearance, and a 32 mm pattern in a white epoxy coated left hand drawer member. For euro-style cabinet projects built around 1805 Series components, these verified details support straightforward layout, predictable drawer motion, and consistent alignment across multiple installations.
Sold In: 100 Each
