Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand cabinet member from Knape & Vogt's 1805 series — a 12 inch (300mm nominal), white epoxy-coated, self-closing Euro slide component designed for side-mount installation. It is sold as a single handed piece, not a complete slide set, so you order exactly the count your production run or repair job needs.
The 12 inch length suits compact drawers in bathroom vanities, small base cabinets, and closet organizers where a shorter cabinet depth limits the slide size. It is a natural fit for production shops building standard-duty cabinetry on the 32mm system and for refacing crews who need to replace only the cabinet-side profile without pulling the drawer member. At 75 lb capacity per pair, it handles everyday household loads without overbuilding the slide specification.
The white epoxy coating is the defining choice here. In a white melamine or painted cabinet box, a zinc-finish steel member catches the eye every time the drawer opens; the white epoxy face does not. The steel substrate behind that coating gives the 1805 member its rigidity and consistent travel across cycles. One drawer requires this right-hand cabinet member plus one left-hand cabinet member from the same 1805 series, plus both drawer members — four pieces total, all sourced from the 1805 line. Members from other brands and other KV series do not interchange with the 1805.
Cabinet shops running white-interior production lines get the most value here: Q-Pack quantities cut down on individual-piece handling, the handed format lets you buy exactly the mix of left and right members your build schedule calls for, and the white finish eliminates the hardware-showing-through problem without an extra finishing step. It also works well for service calls where only one side of a worn slide needs replacing — order this cabinet member and the matching drawer member, not a whole new slide set.
No. This is the right-hand cabinet member only. A working drawer needs a left-hand cabinet member, a right-hand cabinet member, and both drawer members — all from the 1805 series.
No. The 1805 self-closes on a mechanical ramp that pulls the drawer fully shut once it enters the capture zone. There is no damper; the close is positive, not slowed or cushioned.
Knape & Vogt recommends a maximum drawer width of 18 inches for the 1805 series. Build the drawer box 1 inch narrower than the inside cabinet opening to leave 1/2 inch of side clearance per slide.
No. The 1805 series is specific to Knape & Vogt; mix only 1805 cabinet members with 1805 drawer members. Other brands and other KV series are not interchangeable.
Q-Pack quantities are listed in the product spec block on this page. Confirm the count before placing your order if the pack size affects your build schedule.
When the cabinet interior is white and the drawer count is high, buying handed members in production quantities keeps the line moving and the hardware invisible — which is exactly what the 1805 right-hand cabinet member in white is built to do.
Sold In: 100 Each
