Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 12 inch drawer slide describes this 1805-99 WH 300 left hand cabinet member from the 1805 Series, giving you a defined length for shallow cabinet drawers. As a side mount drawer slide, it installs to the cabinet side and works with the matching drawer member for dependable movement. The 3/4 extension design lets the drawer travel part way out, balancing access to contents with controlled support inside the cabinet. A self-closing design pulls the drawer fully shut at the end of travel, which helps keep fronts aligned in everyday use. The positive double-out stop keeps the slide from over-travel, protecting both the member and the drawer construction during repeated openings. Its white epoxy coated finish provides a smooth running surface, while matching light-colored cabinet interiors for a clean, consistent look on residential or commercial projects.
This 1805 Series side mount drawer slide cabinet member is designed for installation on the cabinet side, pairing with the corresponding drawer member to form the full slide. The specified side clearance of 1/2 inch plus or minus 1/32 inch each side guides your drawer width calculations, so the drawer can move freely while remaining well supported. A 35.5 mm member height with 32 mm pattern lets you coordinate mounting holes with 32 mm system line boring, which is useful when aligning multiple slides across a cabinet run. Using the recommended #6 x 5/8 inch Phillips pan head screws matches the slide hole geometry and typical cabinet side thickness, helping the member seat flat against the case side for consistent performance.
This Knape and Vogt 1805-99 WH 300 part is the left hand cabinet member from the 1805 Series, so it mounts to the left interior side of the cabinet and mates with the corresponding left hand drawer member. Classified as a side mount drawer slide component, it suits casework where you want the slide concealed along the sides rather than under the drawer. The 12 inch nominal length fits compact drawers, such as smaller base cabinets or upper storage where full-depth travel is not required. With side clearance set at 1/2 inch plus or minus 1/32 inch per side, it pairs with properly sized drawers in new cabinet construction or controlled retrofits. The 35.5 mm height and 32 mm pattern align with system-drilled cabinetry using the 32 mm standard, helping it integrate into production shops already built around line-bored cases. The white epoxy coated finish matches white cabinet interiors and drawer boxes.
The 3/4 extension function on this 1805 Series member limits drawer travel to part of its depth, which supports the drawer over more of its length while still giving access to stored items. A self-closing design completes the last part of closing, drawing the drawer fully shut against the front, which helps keep reveals even across a bank of drawers. The positive double-out stop defines the maximum opening position and prevents the slide from over-extending, which protects both the cabinet and drawer members during repeated use. The white epoxy coating gives the running surfaces a consistent finish, which supports smooth action between cabinet and drawer members over time. Recommended #6 x 5/8 inch Phillips pan head screws are sized to seat in the slide holes and typical cabinet side material, tying the member firmly to the case side so the self-closing and stop features work as intended in daily service.
The 1805-99 WH 300 is a Knape and Vogt 1805 Series side mount drawer slide cabinet member, so it installs on the cabinet side and works with matching drawer members.
This 1805 Series member has a self-closing design, which pulls the drawer fully shut at the end of travel and helps keep drawer fronts aligned in regular use.
This euro slide is specified as 3/4 extension, so the drawer opens part way, providing access while keeping more of the drawer supported inside the cabinet.
This slide uses a side clearance of 1/2 inch plus or minus 1/32 inch on each side, which guides drawer width for smooth running without excessive play or binding.
This member has a 32 mm pattern, which allows mounting to line-bored cabinet sides laid out on the 32 mm system, supporting faster and more consistent installation.
This Knape and Vogt 1805 Series member has a white epoxy coated finish, providing a smooth running surface and matching light-colored cabinet interiors.
This KV 1805-99 WH 300 left hand cabinet member brings a 12 inch length, 3/4 extension travel, and self-closing design to new cabinet builds or upgrades that match the 1805 Series. With 1/2 inch plus or minus 1/32 inch side clearance and a 32 mm pattern, it fits well into casework laid out on established system drilling. The white epoxy coated finish suits white cabinet interiors, aligning visually with common drawer boxes. For projects using Knape and Vogt 1805 Series euro slides, this left hand cabinet member is a practical choice when specifying 12 inch side mount drawers.
Sold In: 100 Each
